Scottish Borders · Scotland
Non-slip bath & shower coating in Burnmouth, Scottish Borders
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Burnmouth. Free, fixed quotes from your photos.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How we handle non-slip bath coating in Burnmouth
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across resurfaced baths, shower trays and wet room floors (ask us).
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Burnmouth (TD14)
- Area hub
- Scottish Borders
- Guarantee
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Burnmouth
Other services in Burnmouth
Common problems we fix in Burnmouth
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Before booking anyone
- What prep work is covered
- How to care for the finish
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
FAQs for Burnmouth
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
How much does non-slip bath coating cost in Burnmouth?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Do you work in Burnmouth?
Yes. We work across the UK and come to Burnmouth. Send us photos for a fixed quote, or call 0345 017 0787.
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- The material
- How much damage there is
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Quotes from your photos
Two or three clear photos are typically enough. It helps if you send:
- Whether it’s been repaired or coated before
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.
When we’d advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Burnmouth
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
Where we work around Burnmouth
Burnmouth is about 6 miles north-west of Berwick-upon-Tweed, in the Scottish Borders. We visit clients in Burnmouth and the surrounding area, so nothing has to leave your home. Burnmouth is one of 89 towns and villages in the Scottish Borders we cover. Our jobs stretch from Burnmouth to Edinburgh (44 miles away).
All of TD14 is covered, from the main roads to the quietest streets. Streets in the area include Woodbine Grove, Woodbine Drive and Lyall Terrace. Other places close to Burnmouth include Ayton (2 miles west), Eyemouth (2 miles north), Foulden (4 miles south), St Abbs (4 miles north-west) and Coldingham (4 miles north-west).
What’s near Burnmouth
In Burnmouth, that means homes near Burnmouth and the streets around them. The closest station to Burnmouth is Reston station, about 4.6 miles west of the centre. Further afield, we also cover the area around Ferney Castle (4.6 miles west) and St. Mary Magdalen's Hospital (5.4 miles south-east). Green spaces nearby include Ayton Hill.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Most jobs done in one visit
- Every repair guaranteed for a year
- No need to remove anything
- Rooms protected and left tidy
Read our prices page.
Landlord and trade work in Burnmouth
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
The process
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
How to prepare
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Make sure the room can be ventilated
How to get a price
Most customers in Burnmouth get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
