Derbyshire · England

Non-slip bath & shower coating in Burntheath, Derbyshire

Non-slip bath coating for Burntheath, without a refit. Send us photos for a fixed price, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Burntheath

How we handle non-slip bath coating in Burntheath

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and a bath or tray that is slippery when wet, we can help, on shower trays, acrylic baths and wet room floors (ask us) alike.

All our work is covered by a one-year guarantee, wherever you are in Derbyshire. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Burntheath (DE65)
Region
Derbyshire
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited
  • We will tell you if it’s not worth repairing
  • We leave the room as we found it

Take a look at our pricing.

How we price non-slip bath coating

You’ll know the full cost before booking. We look at:

  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • The material and finish
  • Where the damage is and how we get to it

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from pictures

We price nearly every job from photos. This is what we need:

  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Natural light rather than flash
  • One picture of the entire bath or shower tray

The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Landlord and trade work in Burntheath

If you manage property in Burntheath, we’ll quote for several properties at once. Send pictures for each one and we will price them together.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Burntheath and the surrounding area

Burntheath is about 5 miles north of Burton upon Trent, in Derbyshire. Anywhere in DE65, we come to you. Burntheath is one of 532 places in Derbyshire we cover. We work right across the region, from Burntheath to Birmingham (30 miles away).

Jobs in DE65 are booked in the same way as anywhere else. Other places close to Burntheath include Hilton (1 mile south), Marston on Dove (1 mile south-west), Hatton Fields (1 mile west), Hatton (2 miles south-west) and Egginton (2 miles south-east). We also work in nearby towns such as Swadlincote (8 miles south-east), Ilkeston (15 miles north-east), Long Eaton (15 miles east), Belper (12 miles north-east), Heanor (15 miles north-east) and Ripley (15 miles north-east).

What’s near Burntheath

Our clients here include homes close to Hilton Primary School and John Port Spencer Academy. The closest station to Burntheath is Tutbury & Hatton station, roughly 2.2 miles south-west. Well-known places in the area include Tutbury Museum (2.7 miles south-west) and Tutbury Castle (2.7 miles south-west).

Map of Burntheath © OpenStreetMap contributors

What we’re called out for in Burntheath

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Common reasons people in Burntheath contact us are:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • When it can be used again
  • Whether cleaning and preparation are in the price
  • If travel is included in the price
  • How long the guarantee is and what it covers

Choosing a repair company

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

What we can’t put right

We will not take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and let you know when you can use it again.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work
  • Keep a parking space free if you can

Get a quote

For a price in Burntheath, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

FAQs for Burntheath

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Derbyshire.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

What happens after I send photos?

You get a fixed quote and available dates. If we need another angle, we will ask.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.