Staffordshire · England
Non-Slip Bath Coating in Burntwood
Clear non-slip coatings for baths and shower trays at your home in Burntwood, with a one-year guarantee on every repair.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Landlord and trade work in Burntwood
Landlords, letting agents and housing providers in Burntwood use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Non-slip bath coating at your home in Burntwood
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, on shower trays, enamelled baths and acrylic baths.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Burntwood (WS7)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Burntwood
Other services in Burntwood
When to call us in Burntwood
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The things customers normally mention when they call are:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
What to look for in a quote
- How long the guarantee is and what it covers
- When it can be used again
- How changes to the job are handled
- If travel is included in the price
About Burntwood
Burntwood is about 4 miles east of Cannock, in Staffordshire. Whether you are in the middle of Burntwood or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Burntwood is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Burntwood to Birmingham (about 15 miles away).
All of WS7 is covered. You will find streets such as High Street, Cedar Road and Bridge Cross Road, and we cover them all. Burntwood sits on or near the A5190, so getting to you is simple. Other places close to Burntwood include Chase Terrace (1 mile north-west), Boney Hay (1 mile north), Chasetown (1 mile south), Burntwood Green (1 mile east) and Hammerwich (1 mile south-east). Further out, we also cover Stafford (12 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (11 miles east), Cannock (4 miles west), Lichfield (4 miles east) and Rugeley (5 miles north). Burntwood is among the bigger towns we cover in Staffordshire.
Around Burntwood
Typical jobs here are in homes near Springhill Primary Academy, The Nags Head pub and Prince's Park and the streets around them. Also close by are Chase Terrace Technology College (under half a mile north) and St Anne's Church (0.5 miles west). The closest station to Burntwood is Hednesford station, roughly 3.8 miles north-west. Further afield, we also cover the area around St Matthew's Hospital (1.5 miles east) and Letocetum Roman Baths And Museum (3.3 miles south-east). Green spaces nearby include Minster Pool and George's Hayes.
- Local facilities include Ogley Hay Rural (2.5 miles south-east)
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Point us to the nearest place to park
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repair or replace in Burntwood?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- Every repair guaranteed for a year
Read our prices page.
What non-slip bath coating costs
There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The material and finish
- How much damage there is
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- Details of any past repairs
- One picture of the whole bath or shower tray
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price the same day in most cases.
FAQs for Burntwood
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
What does non-slip bath coating cost?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do you cover Burntwood?
We do. Repair technicians travel to Burntwood from across the region, with no extra charge for travel.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What we can’t put right
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
About our accreditations · Every repair comes with a one-year guarantee.
