Somerset · England

Non-Slip Bath Coating for Buscott homes

Non-slip bath coating in Buscott without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Buscott

Honest limits

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we repair

  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Resurfaced baths

Non-slip bath coating in Buscott without replacing anything

It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. If you’re dealing with a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, we can help, on acrylic baths, wet room floors (ask us) and shower trays alike.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Buscott (TA7)
Area hub
Somerset
Warranty
12 months on all our work
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

Buscott: your questions answered

Can you repair several things at once?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Can you repair something that’s been repaired before?

Most of the time. Tell us what was done before.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What we do, step by step

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Let us know which floor the room is on
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

How to get a price

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send pictures for a quote

Read more

Signs you need non-slip bath coating in Buscott

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • When it can be used again
  • How the room is protected while they work
  • The length of the guarantee and what it covers
  • What prep work is covered

10 questions to ask before you book

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Where we work around Buscott

Buscott is about 8 miles south-west of Wells, in Somerset. Wherever you are in the TA7 postcode area, we carry out the work at your property. Buscott is one of 640 towns and villages in Somerset where we work.

Postcode districts we cover here: TA7. Other places close to Buscott include Sharpham (1 mile east), Berhill (2 miles south), Walton (2 miles south-east), Asney (2 miles south-east) and Oxenpill (2 miles north). Within a short drive, we also cover Bridgwater (9 miles west), Yeovil (15 miles south-east), Burnham-on-Sea (11 miles north-west), Wells (8 miles north-east), Shepton Mallet (11 miles east) and Street (3 miles south-east).

Local landmarks in Buscott

Locally, our jobs take us to homes close to Church of All Saints, Ashcott Primary School and The Railway Inn. Further afield, we also cover the area around Clarks Village (2.7 miles east) and Sedgemoor (0.7 miles south). For a walk, there is Glastonbury Tor and Ham Wall.

Map of Buscott © OpenStreetMap contributors

What affects the price in Buscott

Quotes are free and the price is fixed. What we look at:

  • The material
  • The type of damage
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Details of any past repairs
  • The material, if you know it

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Buscott. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • A year’s guarantee on all work
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited
  • Most jobs done in one visit

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.