North Lanarkshire · Scotland
Non-slip bath & shower coating in Caldercruix, North Lanarkshire
Non-slip bath coating in Caldercruix without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
About our non-slip bath coating in Caldercruix
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s a bath or tray that is slippery when wet and worn-out textured areas, we can usually put it right.
Whatever the size of the job, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Caldercruix (ML6)
- County
- North Lanarkshire
- Warranty
- One year on every repair
- Quotes
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Caldercruix
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across North Lanarkshire.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
When a repair is not the answer
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- A fixed quote before booking
See our prices page.
How we price non-slip bath coating
Each job gets its own fixed price. These are the things that affect it:
- Where the damage is and how we get to it
- What the surface is made of
- The type of damage
- The size and number of damaged areas
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- A wider photo showing the entire bath or shower tray
- Your postcode, so we can check dates
- The material, if you know it
- Something in shot to show the size
For a price in Caldercruix, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Landlords, agents and businesses in Caldercruix
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs in North Lanarkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Our work in Caldercruix
Caldercruix is about 4 miles north-east of Airdrie, in North Lanarkshire. Our technicians come to clients in Caldercruix and nearby villages, so you don’t need to take anything anywhere. Our repair technicians cover all 89 towns and villages across North Lanarkshire, from the larger towns to small villages. We work right across the region, from Caldercruix to Glasgow (15 miles away).
Postcode districts we cover here: ML6. We regularly work on streets such as Station Road, Main Street and Calder Avenue. If you are just outside Caldercruix, we cover Longriggend (1 mile north), Plains (2 miles west), Upperton (2 miles north), Airdriehill (2 miles west) and Moffat Mills (3 miles south-west). We also work in nearby towns such as Motherwell (7 miles south-west), Cumbernauld (6 miles north-west), Coatbridge (6 miles south-west), Airdrie (4 miles south-west), Wishaw (8 miles south) and Bellshill (7 miles south-west).
Around Caldercruix
In Caldercruix, that means homes near Longriggend And Meadowfield Church. Caldercruix has its own railway station: Caldercruix station. A little further out are Wester Moffat Hospital (2.5 miles south-west) and Weavers Cottage Museum (4 miles west). For a walk, there’s Black Loch.
Also near Caldercruix
More services for Caldercruix
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job.
Read more
Common problems we fix in Caldercruix
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
The most common problems we’re called about are:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Whether a trained technician does the job
- How to look after the finish
About our accreditations · Every repair comes with a one-year guarantee.
