Herefordshire · England
Non-Slip Bath Coating for Calver Hill homes
Fixed-price non-slip bath coating in Calver Hill and the surrounding area, generally in one visit and guaranteed for a year.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
How we price non-slip bath coating
There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- The material and finish
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Send photos for a quote
You can usually get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
How we handle non-slip bath coating in Calver Hill
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We’re frequently asked to fix bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, in resurfaced baths, enamelled baths and shower trays.
Every repair comes with a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Calver Hill (HR4)
- Region
- Herefordshire
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Resurfaced baths
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
Calver Hill and nearby
Calver Hill is about 10 miles north-west of Hereford, in Herefordshire. Anywhere in HR4, a technician comes to you. Calver Hill is one of 255 towns and villages in Herefordshire where we work. Our jobs stretch from Calver Hill to Birmingham (about 49 miles away).
Here we cover the HR4 postcode area. We also travel to Norton Wood (1 mile west), Norton Canon (1 mile south-east), Sallys (1 mile north-west), Staunton on Wye (2 miles south) and Logaston (2 miles north-west). Larger places within reach include Hereford (10 miles south-east), Leominster (10 miles north-east), Redhill (10 miles south-east), Newton Farm (10 miles south-east), Whitecross (9 miles south-east) and Eign Hill (11 miles south-east).
Around Calver Hill
Our customers here include homes close to Church of St Nicholas. Further afield, we also cover the area around Weobley Museum (2.6 miles north-east) and Kinnersley Castle (1.8 miles west). The countryside around Calver Hill includes Garnons Hill.
Landlords, agents and businesses in Calver Hill
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Common problems we fix in Calver Hill
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Common reasons people in Calver Hill contact us include:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
What your quote should include
- The length of the guarantee and what it covers
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes a morning or an afternoon, and we’ll tell you if anything changes.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Open a window if you can
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repair or replace in Calver Hill?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Our prices are the same across the UK, so there’s no premium for Calver Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Calver Hill
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Same prices wherever you are
- Free fixed quotes from pictures
Read our full price list.
Nearby places to Calver Hill
More services for Calver Hill
Calver Hill: your questions answered
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Which areas do you work in?
The whole UK, including all of Herefordshire. Send your postcode with your photos and we’ll offer you dates.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
About our accreditations · Every repair comes with a one-year guarantee.
