Clackmannanshire · Scotland

Non-slip bath & shower coating in Cambus, Clackmannanshire

We travel to Cambus for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Cambus

About our non-slip bath coating in Cambus

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. If you’re dealing with bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Cambus (FK10)
Area hub
Clackmannanshire
Guarantee
12 months on all our work
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Landlord and trade work in Cambus

We are used to working with agents and managing companies. Just send photos, the address and how to get access.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

FAQs for Cambus

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Cambus and nearby

Cambus is about 2 miles west of Alloa, in Clackmannanshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Cambus is one of 16 places in Clackmannanshire we cover. Our nearest city page is Glasgow, about 25 miles away.

Every address in FK10 is within our area. Streets in the area include Station Road, Main Street and Moubray Gardens, all of which we cover. Close by, we cover Tullibody (1 mile north-east), Menstrie (2 miles north), Manor Powis (2 miles west), Fallin (2 miles south-west) and South Alloa (2 miles south-east). Further out, we also cover Tillicoultry (4 miles north-east), Kincardine (6 miles south-east), Dollar (7 miles east), Clackmannan (4 miles east), Sauchie (3 miles east) and Coalsnaughton (4 miles east).

Landmarks near Cambus

Typical jobs here are in homes near Tullibody Old Kirk, Dunmar House Hotel and Lornshill Academy. For rail, the closest station is Alloa station, roughly 2.2 miles east of the centre. A little further out are Stirling Health and Care Centre (3.8 miles west) and Tullibody Heritage Museum (under half a mile north-east). For a walk, there’s Myreton Hill and Black Devon Wetlands RSPB Reserve.

Map of Cambus © OpenStreetMap contributors

What we can’t put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Materials we work on in Cambus

  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • One-year guarantee on every repair
  • Usually one visit, start to finish
  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do

Take a look at our prices page.

When to call us in Cambus

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • How the colour is matched
  • Whether a trained technician does the job
  • How long it needs to cure
  • What prep work is covered

Choosing a repair company

The process

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Get a quote

Send us photos of the damage and a wider shot of the entire item, with your FK10 postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Advice

Prices and what affects them

There’s no charge for travel to Cambus. The price comes down to:

  • How many areas need work
  • Doing more than one item at once
  • The material
  • How hard the colour is to match

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Good photos mean an accurate price. Here’s what helps:

  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • A photo taken from further back
  • The postcode, so we can plan the visit

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.