North Lanarkshire · Scotland

Non-Slip Bath Coating in Carnbroe

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Carnbroe. Free, fixed quotes from your photos.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Carnbroe

Non-slip bath coating in Carnbroe without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, in acrylic baths, enamelled baths and resurfaced baths.

Every job is backed for twelve months in Carnbroe and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Carnbroe (ML5, ML6)
County
North Lanarkshire
Warranty
12 months on all our work
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Common questions in Carnbroe

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

What we’re called out for in Carnbroe

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a picture:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • How to care for the finish
  • If travel is included in the price
  • Whether the colour is mixed to match
  • What prep work is covered

Choosing a repair company

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What we do, step by step

We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area
  • Have somewhere for us to park nearby if possible

How to get a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

Send photos for a quote

Read more

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Why Carnbroe customers choose us

  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year
  • A fixed quote before booking
  • Dust sheets down, tidy finish

Read our pricing.

What non-slip bath coating costs

Prices are worked out job by job. What matters most is:

  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • What the surface is made of

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

The better the pictures, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • Natural light rather than flash
  • Something in shot to show the size
  • Where you are, by postcode

Send us pictures of the damage and one of the entire item, with your ML5 postcode, and we will reply with a fixed quote.

Covering Carnbroe

Carnbroe is about 1 mile south-east of Coatbridge, in North Lanarkshire. Our repair technicians come to customers in Carnbroe and the surrounding area, so there’s no workshop to go to. Our technicians cover 89 places across North Lanarkshire. Our jobs stretch from Carnbroe to Glasgow (about 11 miles away).

Our visits in ML5 and ML6 are booked in the same way as anywhere else. Whether you live on Carnbroe Road, Brambling Road and Drummore Avenue or a nearby road, a technician can come to you. Nearby, we also work in Coatbridge (1 mile north-west), Old Monkland (2 miles west), Mossend (2 miles south), Bellshill (2 miles south) and Viewpark (2 miles south-west). Within a short drive, we also cover Motherwell (4 miles south), Cumbernauld (7 miles north), Wishaw (6 miles south-east), Kilsyth (9 miles north), Shotts (8 miles east) and Airbles (4 miles south).

Around Carnbroe

Our clients here include homes close to Calder Parish Church and Airdrie Academy and the streets around them. Carnbroe’s nearest station is Whifflet station, roughly 0.8 miles north-west of the centre. Other landmarks nearby include Coathill Hospital (1 mile west) and Airdrie Museum (1.5 miles north-east). Not far away are Strathclyde Loch.

Map of Carnbroe © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.