Buckinghamshire · England

Non-Slip Bath Coating in Chalkshire

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Chalkshire. Free, fixed quotes from your photos.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Chalkshire

Non-slip bath coating in Chalkshire, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with a bath or tray that is slippery when wet and safety for older or less mobile people, we can typically put it right, on wet room floors (ask us), enamelled baths and shower trays alike.

We stand behind the work with a one-year guarantee, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Chalkshire (HP17)
Area hub
Buckinghamshire
Guarantee
12 months on all our work
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Chalkshire customers choose us

  • Fixed prices from your photos
  • Accredited with CHAS, Constructionline and SafeContractor
  • Dust sheets down, tidy finish
  • One-year guarantee on every repair

Take a look at our pricing.

Prices and what affects them

You won’t pay by the hour. The price depends on:

  • Access to the area
  • What kind of damage it is
  • How much damage there is
  • The material and finish

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

Two or three clear pictures are typically enough. It helps if you send:

  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale

Send us a photo of the damage and one of the entire item, and tell us you’re in Chalkshire, and we will come back with a fixed quote.

Our work in Chalkshire

Chalkshire is about 4 miles south of Aylesbury, in Buckinghamshire. Our technicians come to homes and businesses in Chalkshire and the surrounding area, so there’s no workshop to go to. We cover 263 places across Buckinghamshire. Our nearest city page is London, about 35 miles away.

We cover every part of the HP17 postcode area. Neighbouring places we cover include Terrick (1 mile north), Butler's Cross (1 mile south), Nash Lee (1 mile north), Ellesborough (1 mile south-west) and Coombe (1 mile south). Within a short drive, we also cover Aylesbury (4 miles north), High Wycombe (9 miles south), Chesham (8 miles south-east), Marlow (13 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).

What’s near Chalkshire

Locally, our jobs take us to homes close to Church of St Peter and St Paul, John Colet School and The Russell Arms. For rail, the closest station is Little Kimble station, about 1.3 miles south-west. Nearby you will also find Little Kimble Motte (1.1 miles south-west) and Stoke Mandeville Hospital (2.7 miles north). Green spaces nearby include Brush Hill Local Nature Reserve and Coombe Hill.

Map of Chalkshire © OpenStreetMap contributors

Landlords, agents and businesses in Chalkshire

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

How it works

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area

Getting a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Get a free quote

Read more

Do you need non-slip bath coating in Chalkshire?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Signs it’s time to call us include:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Comparing quotes

  • How long it needs to cure
  • The length of the guarantee and what it covers
  • How the colour is matched
  • Aftercare advice

Choosing a repair company

Honest limits

In fairness, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before booking.

Materials we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Resurfaced baths

Your questions about non-slip bath coating in Chalkshire

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Is the work guaranteed?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Do you work in Chalkshire?

We do. We send a technician to Chalkshire for every job, and the price is the same as everywhere else.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.