Kent · England

Non-Slip Bath Coating for Clapper Hill homes

Non-slip bath coating in and around Clapper Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Clapper Hill

How we handle non-slip bath coating in Clapper Hill

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, on resurfaced baths, wet room floors (ask us) and enamelled baths alike.

Every job is backed for twelve months in Clapper Hill and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Clapper Hill (TN27)
Region
Kent
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

FAQs for Clapper Hill

Are there extra charges for Clapper Hill?

There is no separate call-out charge. The fixed quote covers the visit and the work.

How do I get a price for non-slip bath coating in Clapper Hill?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

What do you need from me?

Photos of the damage, a picture of the entire bath or shower tray and your postcode. Then we’ll agree a date.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before and we will plan for it.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Which areas do you work in?

We work UK-wide, so Clapper Hill is covered. Our prices are the same everywhere.

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Avoid using the area for a few hours before we arrive

How to get a price

If you’re in Clapper Hill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Do you need non-slip bath coating in Clapper Hill?

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People typically call us after spotting one of these:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Questions to ask before you book

  • What happens if they find more damage
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • How your room will be protected

Choosing a repair company

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Landlords, letting agents and housing providers in Clapper Hill use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

When we’d advise against a repair

It helps to know what we cannot do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Clapper Hill

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)

Prices and what affects them

We give every job a fixed price from photos. This is what makes a difference:

  • The type of damage
  • Access to the area
  • Any earlier repairs that need removing first
  • The material

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

Most quotes are done from pictures alone. To make it quick:

  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • A wider photo showing the whole bath or shower tray
  • Your postcode, so we can check dates

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Our work in Clapper Hill

Clapper Hill is about 10 miles west of Ashford, in Kent. Across the TN27 area, we carry out the work at your property. We cover 922 places in Kent. You can also see our page for London, about 42 miles away.

All of TN27 is within our area. If you are just outside Clapper Hill, we cover Fosten Green (1 mile west), East End (1 mile south-west), Parkgate (1 mile south-east), London Beach (2 miles east) and Strood (3 miles south). We also work in nearby towns such as Maidstone (13 miles north), Ashford (10 miles east), Foley Park (14 miles north), Paddock Wood (12 miles north-west), Tenterden (3 miles south-east) and Bearsted (12 miles north).

Around Clapper Hill

Typical jobs here are in homes near Wattle Wood, among other places. The closest station to Clapper Hill is Headcorn station, about 4.8 miles north of the centre. Other landmarks nearby include Mervyn Quinlan Museum (1.2 miles south-west) and Sissinghurst Castle (2.8 miles north-west).

Map of Clapper Hill © OpenStreetMap contributors

Why repair rather than replace?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • No need to remove anything
  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area
  • Free fixed quotes from pictures

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.