East Renfrewshire · Scotland
Non-Slip Bath Coating for Clarkston homes
We travel to Clarkston for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Clarkston
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include a bath or tray that is slippery when wet and safety for older or less mobile people, on enamelled baths, shower trays and wet room floors (ask us).
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Clarkston (G76, G77, G46)
- Area hub
- East Renfrewshire
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What non-slip bath coating costs
Each job gets its own fixed price. This is what makes a difference:
- The material
- Where the damage is and how we get to it
- The colour and finish to match
- How many areas need work
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Any details about the material
- A photo taken from further back
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
FAQs for Clarkston
Do you come to Clarkston?
Yes. We cover the whole UK and come to Clarkston and the rest of East Renfrewshire. Send us photos for a fixed quote, or call 0345 017 0787.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
What areas do you cover?
The whole UK, including all of East Renfrewshire. Send your postcode with your pictures and we’ll offer you dates.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Clarkston customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- One price list for the whole UK
- Everything repaired in place
Read our prices page.
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
When to call us in Clarkston
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted any of these:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What your quote should include
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- If travel is included in the price
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Clarkston use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Clarkston and nearby
Clarkston is about 4 miles north-west of East Kilbride, in East Renfrewshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 17 places in East Renfrewshire, from the larger towns to small villages.
Jobs in G76, G77 and G46 work the same way as everywhere else we cover. You will find streets such as Golf Road, Bull Road and Broom Road. Clarkston sits on or near the A727, so getting to you is simple. We also cover the places around Clarkston: Millerston (1 mile south-east), Busby (1 mile east), Stamperland (1 mile north-east), Giffnock (1 mile north) and Waterfoot (1 mile south). Within a short drive, we also cover Barrhead (4 miles west), Arthurlie (4 miles west), Neilston (5 miles west), Auchenback (4 miles west), Eaglesham (3 miles south) and Nitshill (3 miles north-west).
Local landmarks in Clarkston
Our clients here include homes close to Greenbank Parish Church, Belmont House School and Mearns Castle High School and the streets around them. The nearest railway station is Clarkston station, roughly 0.8 miles north-east of the centre. A little further out are Scottish Football Museum (3.4 miles north-east) and Hairmyres Hospital (3 miles south-east). Green spaces nearby include Cathkin Braes and Brother Loch.
Places near Clarkston
Also in Clarkston
About our accreditations · Every repair comes with a one-year guarantee.
