Essex · England

Non-Slip Bath Coating for Clavering homes

Non-slip bath coating across Clavering and nearby, typically in one visit.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Clavering

Our work in Clavering

Clavering is about 6 miles south-west of Saffron Walden, in Essex. Clients in Clavering get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in all 644 towns and villages in Essex, from the larger towns to small villages. Our jobs stretch from Clavering to London (about 34 miles away).

Every address in CB11 is within our area, from the main roads to the quietest streets. From High Street, Skeins Way and Chapel Close or anywhere nearby, we can come to you. We also cover the places around Clavering: Hill Green (1 mile north-east), Starling's Green (1 mile west), Berden (1 mile south), Wicken Bonhunt (2 miles north-east) and Arkesden (2 miles north-east). Within a short drive, we also cover Harlow (14 miles south), Saffron Walden (6 miles north-east), Great Dunmow (11 miles south-east), Stansted Mountfitchet (5 miles south-east), Newhall (13 miles south) and Elsenham (5 miles south-east).

What’s near Clavering

Around Clavering, we work in homes near Fox And Hounds Inn, Church of St Mary and St Clement and Clavering Primary School. The closest station to Clavering is Newport (Essex) station, about 3.3 miles east. Well-known places in the area include Brent Pelham (2.9 miles west). The countryside around Clavering includes Aubrey Buxton Nature Reserve.

Map of Clavering © OpenStreetMap contributors

About our non-slip bath coating in Clavering

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re often asked to fix worn-out textured areas and bath mats that harbour mould or get forgotten, on acrylic baths, wet room floors (ask us) and shower trays.

You get a one-year guarantee, the same in Clavering as everywhere else we work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Clavering (CB11)
Region
Essex
Cover
One year on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Clavering

  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays

Landlord and trade work in Clavering

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a morning or an afternoon, and you can get on with other things while we’re there.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access
  • Mention if the room is upstairs or in a flat

How to get a price

To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Related advice

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Common problems we fix in Clavering

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people contact us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas

Comparing quotes

  • What protection goes down before work starts
  • When it can be used again
  • Whether the colour is mixed to match
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Clavering

  • Dust sheets down, tidy finish
  • Work done at your home or business
  • CHAS and Constructionline accredited
  • A year’s guarantee on all work

Take a look at our pricing.

Clavering questions

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can pets and children be at home?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Prices and what affects them

We price every job individually, from your pictures. The main factors are:

  • How much damage there is
  • Whether we combine several jobs
  • The type of damage
  • The material

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from pictures

Phone photos are fine. Make sure they show:

  • Details of any past repairs
  • A wider photo showing the whole bath or shower tray
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

If you are in Clavering and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.