Scottish Borders · Scotland

Non-slip bath & shower coating in Clovenfords, Scottish Borders

Clear non-slip coatings for baths and shower trays for homes and businesses in Clovenfords and across the Scottish Borders. Send pictures for a free, fixed quote.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Clovenfords

Non-slip bath coating at your home in Clovenfords

The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can help.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Clovenfords (TD1)
Region
Scottish Borders
Guarantee
One year on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What we cannot put right

To be straight with you, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Shower trays

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.

Get a fixed price

Related advice

What we are called out for in Clovenfords

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

People generally call us when they notice something like this:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • What happens if the damage is worse than the photos show
  • Whether a trained technician does the job
  • What preparation is included
  • What the guarantee covers, and for how long

10 questions to ask before booking

Our work in Clovenfords

Clovenfords is about 3 miles west of Galashiels, in the Scottish Borders. Jobs in Clovenfords are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Clovenfords is one of 89 places in the Scottish Borders we cover. You can also see our page for Edinburgh, about 26 miles away.

Postcode districts we cover here: TD1. We regularly work on streets such as The Old Vineries, Vine Street and Muscat Brae and the roads around them. Close by, we cover Caddonfoot (1 mile south), Peel (1 mile south-west), Ashiestiel (1 mile south-west), Galashiels (3 miles east) and Boleside (3 miles south-east). Within a short drive, we also cover Hawick (14 miles south), Peebles (13 miles west), Selkirk (5 miles south), Wilton (14 miles south), Innerleithen (7 miles west) and Melrose (6 miles east).

Landmarks near Clovenfords

We visit homes around Galashiels Academy, Clovenfords Hotel and Graveyard and Boundary Walls, among other places. For rail, the closest station is Galashiels station, roughly 2.7 miles east. Further afield, we also cover the area around Borders General Hospital (5.5 miles east) and Old Gala House (2.6 miles east). For a walk, there’s Ashiesteel Hill.

Map of Clovenfords © OpenStreetMap contributors

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Same prices wherever you are
  • A fixed quote before you book
  • Dust sheets down, tidy finish
  • Generally one visit, start to finish

Read our prices page.

Questions from Clovenfords

Do you charge for travel?

There is no separate call-out charge. Your fixed price includes everything.

Do you cover the whole of the Scottish Borders?

The entire UK, including all of the Scottish Borders. Send your postcode with your pictures and we’ll offer you dates.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do the materials smell?

There may be a mild smell during the work.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Prices and what affects them

Prices are worked out job by job, from your photos. The main factors are:

  • How much damage there is
  • How easy the damage is to reach
  • Doing more than one item at once
  • Any earlier repairs that need removing first

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • Something in shot to show the size
  • The postcode, so we can plan the visit

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.