Devon · England

Non-Slip Bath Coating in Clyst St George

Non-slip bath coating in Clyst St George without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Clyst St George

Where we work around Clyst St George

Clyst St George is about 4 miles south-east of Exeter, in Devon. Customers in Clyst St George get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover all 586 towns and villages across Devon, from the larger towns to small villages.

Every address in EX3 is within our area, from the main roads to the quietest streets. From Chapel Hill, Exmouth Road and Woodbury Road or a nearby road, a technician can come to you. We also cover the places around Clyst St George: Ebford (1 mile south), Topsham (1 mile west), Exton (1 mile south), Woodbury (2 miles south-east) and Exminster (2 miles west). Within a short drive, we also cover Exeter (4 miles north-west), Exmouth (5 miles south-east), Newton Abbot (13 miles south-west), Tiverton (15 miles north), Teignmouth (10 miles south) and Sidmouth (9 miles east).

Local landmarks in Clyst St George

Around Clyst St George, we work in homes near St. George and Dragon pub, Parish Church of St George and Lady Seaward Church Of England Primary School, among other places. The nearest railway station is Topsham station, about 0.9 miles west. A little further out are Darts Farm (within half a mile south-west) and Topsham Museum (1.1 miles south-west). Not far away are Bowling Green Marsh RSPB reserve.

Map of Clyst St George © OpenStreetMap contributors

Non-slip bath coating in Clyst St George, done in place

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s safety for older or less mobile people and a bath or tray that is slippery when wet, we can generally put it right, on wet room floors (ask us), acrylic baths and shower trays alike.

Whatever the size of the job, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Clyst St George (EX3)
County
Devon
Cover
One year on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

FAQs for Clyst St George

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Which areas do you work in?

We cover the whole UK, including Clyst St George and the rest of Devon. Just include your postcode and we will offer you dates.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Repairing versus replacing in Clyst St George

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there’s no premium for Clyst St George. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • One-year guarantee on every repair
  • No extra charge for your area
  • Rooms protected and left tidy
  • Normally one visit, start to finish

Read our full price list.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What non-slip bath coating costs

There are no hourly rates or hidden extras. The price depends on:

  • Doing more than one item at once
  • The material and finish
  • Unusual colours or finishes
  • How many areas need work

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.

Getting a price from photos

Two or three clear pictures are typically enough. Try to include:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • Something in shot to show the size
  • A wider photo showing the entire bath or shower tray

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

What we do, step by step

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and ready to use once it has cured.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access
  • Make sure the room can be ventilated

Ask for a price

Send us photos of the damage and a wider shot of the entire item, and tell us you are in Clyst St George, and we will come back with a fixed quote.

Send pictures for a quote

Advice

When a repair is not the answer

It helps to know what we cannot do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths

Work for landlords and builders

Landlords, letting agents and housing providers in Clyst St George use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Common problems we fix in Clyst St George

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

People normally call us after spotting one of these:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before booking anyone

  • Whether cleaning and preparation are in the price
  • Whether the price covers travel
  • How long the guarantee is and what it covers
  • How soon you can use it again

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.