East Lothian · Scotland
Non-Slip Bath Coating in Cockenzie and Port Seton
Fixed-price non-slip bath coating in Cockenzie and Port Seton and the surrounding area, usually in one visit and guaranteed for a year.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our non-slip bath coating in Cockenzie and Port Seton
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Whether it’s worn-out textured areas and bath mats that harbour mould or get forgotten, we can help, on acrylic baths, wet room floors (ask us) and shower trays alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Cockenzie and Port Seton (EH32)
- Region
- East Lothian
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Cockenzie and Port Seton questions
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
How much does non-slip bath coating cost in Cockenzie and Port Seton?
Because every job differs, we price from photos. You will get a fixed figure before booking.
Do you cover Cockenzie and Port Seton?
Yes, we do. We send a technician to Cockenzie and Port Seton for every job, with no extra charge for travel.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in East Lothian and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Cockenzie and Port Seton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
Prices and what affects them
We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The colour and finish to match
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath or shower tray
- Your postcode, so we can check dates
- A clear, close picture of the problem area
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Common problems we fix in Cockenzie and Port Seton
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- How to care for the finish
- How soon you can use it again
- Whether the price covers travel
- Whether a trained technician does the job
What we cannot put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before you book.
Materials we repair
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
Our work in Cockenzie and Port Seton
Cockenzie and Port Seton is about 4 miles north-east of Musselburgh, in East Lothian. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 48 towns and villages across East Lothian. Our jobs stretch from Cockenzie and Port Seton to Edinburgh (about 10 miles away).
Jobs in EH32 are booked in the same way as anywhere else. Local streets include High Street, Park View West and North Seton Park, all of which we cover. Cockenzie and Port Seton sits on or near the B1348 and B6371, so getting to you is simple. If you’re just outside Cockenzie and Port Seton, we cover Seton (1 mile south), Prestonpans (1 mile south-west), Tranent (2 miles south), Prestongrange (2 miles south-west) and Macmerry (3 miles south-east). We also work in nearby towns such as Musselburgh (4 miles south-west), Haddington (7 miles east), North Berwick (11 miles north-east), Wallyford (3 miles south-west), Gullane (7 miles north-east) and East Linton (11 miles east). As one of the bigger places in East Lothian, Cockenzie and Port Seton sees plenty of our work.
Landmarks near Cockenzie and Port Seton
Typical jobs here are in homes near Chalmers Memorial Church and Preston Lodge High School and the streets around them. The closest station to Cockenzie and Port Seton is Prestonpans station, roughly 1.5 miles south-west. Well-known places in the area include Seton Castle (0.8 miles south-east) and Battle of Prestonpans Jacobite Museum (1.5 miles south-west).
Towns and villages near Cockenzie and Port Seton
More services for Cockenzie and Port Seton
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
- Typically one visit, start to finish
- Rooms protected and left tidy
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
