Gwynedd · Wales

Non-Slip Bath Coating in Coed Ystumgwern

Our technicians come to Coed Ystumgwern for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Coed Ystumgwern homes

How we handle non-slip bath coating in Coed Ystumgwern

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We are often asked to fix safety for older or less mobile people and worn-out textured areas, on wet room floors (ask us), enamelled baths and shower trays.

A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Coed Ystumgwern (LL44)
Region
Gwynedd
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • A fixed quote before booking
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited
  • No need to remove anything

See our pricing.

Signs you need non-slip bath coating in Coed Ystumgwern

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Most people contact us when they notice something like this:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

What your quote should include

  • Whether a trained technician does the job
  • How long it needs to cure
  • How your room will be protected
  • How the colour is matched

Choosing a repair company

How we price non-slip bath coating

You’ll know the full cost before you book. We take into account:

  • How much damage there is
  • The material
  • Whether we combine several jobs
  • Where the damage is and how we get to it

Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed price

Most quotes are done from photos alone. To help us price it:

  • Details of any past repairs
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Any details about the material

Most customers in Coed Ystumgwern get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Work for landlords and builders

Landlords, letting agents and housing providers in Coed Ystumgwern use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

How the visit works

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know if it has been repaired before
  • Have somewhere for us to park nearby if possible
  • Tell us about parking, stairs or access

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Related advice

FAQs for Coed Ystumgwern

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you come to Coed Ystumgwern?

We do. We send a technician to Coed Ystumgwern for every job, and the price is the same as everywhere else.

Can I get a quote without a visit?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Coed Ystumgwern and the surrounding area

Coed Ystumgwern is about 30 miles south of Bangor, in Gwynedd. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Coed Ystumgwern is one of 165 towns and villages in Gwynedd we cover. You can also see our page for Liverpool, about 65 miles away.

Here we cover the LL44 postcode area. That includes homes on Ffordd y Llan, Bryn Eiddew and Glanwerydd. Close by, we cover Llanenddwyn (1 mile south), Dyffryn Ardudwy (1 mile south-east), Gwynedd (1 mile east), Llanddwywe (1 mile south) and Tal-y-bont (1 mile south). We also work in nearby towns such as Tywyn (14 miles south), Pwllheli (15 miles north-west), Dolgellau (10 miles east), Porthmadog (9 miles north), Barmouth (5 miles south) and Blaenau Ffestiniog (15 miles north-east).

What’s near Coed Ystumgwern

Locally, our jobs take us to homes close to Ysgol Dyffryn Ardudwy, Ael-y-Bryn Hotel and St Enddwyn's Church. There’s a railway station in Coed Ystumgwern itself: Dyffryn Ardudwy station. Other landmarks nearby include Erwr Castell (0.5 miles north-west). Open spaces near Coed Ystumgwern include Llyn Irddyn and Moelfre.

Map of Coed Ystumgwern © OpenStreetMap contributors

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.