Vale of Glamorgan · Wales
Non-Slip Bath Coating in Cog
Fixed-price non-slip bath coating in Cog and the surrounding area, typically in one visit.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
About our non-slip bath coating in Cog
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and resurfaced baths that are now too smooth, we can help, on resurfaced baths, acrylic baths and wet room floors (ask us) alike.
Whatever the size of the job, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Cog (CF64)
- County
- Vale of Glamorgan
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
What you get with us
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- One-year guarantee on every repair
Take a look at our full price list.
Cog and nearby
Cog is about 2 miles south-west of Penarth, in the Vale of Glamorgan. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Cog is one of 67 towns and villages in the Vale of Glamorgan where we work.
Jobs in CF64 work the same way as everywhere else we cover. Other places close to Cog include Sully and Lavernock (1 mile south), Swanbridge (1 mile south), Palmerstown (1 mile west), Dinas Powys (2 miles north) and Westra (2 miles north-west). We also work in nearby towns such as Barry (3 miles west), Gibbonsdown (3 miles west), Llantwit Major (12 miles west), Cowbridge (11 miles west), Merthyr Dyfan (3 miles west) and Cwm Talwg (4 miles west).
Landmarks near Cog
Typical jobs here are in homes near Sully Primary School, Church of St John the Baptist and Stanwell School, among other places. For rail, the closest station is Dinas Powys station, about 1.4 miles north-west of the centre. Further afield, we also cover the area around Sully Castle (0.7 miles south-west) and University Hospital Llandough (2.6 miles north). Open spaces near Cog include T. G. Tibbetts and Swanbridge Hill.
Also in Cog
Cog: your questions answered
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
How do I get a price for non-slip bath coating in Cog?
Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your CF64 postcode.
Do you come to Cog?
We do. We send a technician to Cog for every job, with no extra charge for travel.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
Prices and what affects them
We charge the same across the UK, including Cog. The price reflects:
- The size and number of damaged areas
- Access to the area
- Any earlier repairs that need removing first
- What the surface is made of
We charge the same wherever you are, with no extra for Cog. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Natural light rather than flash
- Details of any past repairs
- The postcode, so we can plan the visit
- One picture of the whole bath or shower tray
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in the Vale of Glamorgan and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Cog, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
When to call us in Cog
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
What to look for in a quote
- Aftercare advice
- How changes to the job are handled
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
