Norfolk · England

Non-slip bath & shower coating in Colton, Norfolk

Clear non-slip coatings for baths and shower trays at your home in Colton, with a one-year guarantee on every repair.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Colton?

About our non-slip bath coating in Colton

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We work on enamelled baths, resurfaced baths and shower trays, and the jobs we see most are worn-out textured areas and safety for older or less mobile people.

Every repair comes with our one-year guarantee, wherever you are in Norfolk. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Colton (NR9)
Area hub
Norfolk
Guarantee
One year on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

What we’re called out for in Colton

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Before booking anyone

  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • What aftercare is recommended
  • The length of the guarantee and what it covers

10 questions to ask before you book

Questions from Colton

Can you price it without visiting?

Typically, yes. Clear photos let us give you a fixed quote without visiting.

What information do you need?

A close-up, a wider photo and your postcode. Then we will agree a date.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

How we price non-slip bath coating

Prices are worked out job by job, from your photos. What matters most is:

  • What kind of damage it is
  • How hard the colour is to match
  • The size and number of damaged areas
  • Whether we combine several jobs

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Send pictures for a quote

A couple of clear pictures is all it takes. Try to include:

  • Details of any past repairs
  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit

To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

About Colton

Colton is about 5 miles north of Wymondham, in Norfolk. We travel to clients in Colton, so you do not need to take anything anywhere. Colton is one of 797 towns and villages in Norfolk where we work.

Our visits in NR9 are booked in the same way as anywhere else. Whether you live on The Street, Marlingford Road and Norwich Road or anywhere nearby, we can come to you. If you are just outside Colton, we cover Barford (1 mile south), Marlingford (1 mile east), Honingham (1 mile north), Lower Easton (2 miles north-east) and Easton (2 miles east). Within a short drive, we also cover Norwich (7 miles east), Dereham (8 miles west), Wymondham (5 miles south), Sprowston (9 miles east), Thorpe St Andrew (9 miles east) and Attleborough (10 miles south-west).

What’s near Colton

Our customers here include homes close to Norfolk Lurcher pub and Church of St Andrew, among other places. Other landmarks nearby include Norfolk and Norwich University Hospital (4.7 miles south-east) and Costessey Hall (3.5 miles east).

Map of Colton © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why us?

  • Fixed prices from your photos
  • Most jobs done in one visit
  • Work done at your home or business
  • A year’s guarantee on all work

Take a look at our prices page.

What happens on the day

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area
  • Mention any earlier repairs or resurfacing

Ask for a price

For a price in Colton, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Advice

Landlord and trade work in Colton

Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

What we cannot put right

A repair is not always the answer, and we’d rather say so up front. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Surfaces we repair

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.