Devon · England
Non-Slip Bath Coating in Combe Martin
Clear non-slip coatings for baths and shower trays at your home in Combe Martin, with a one-year guarantee on every repair.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Non-slip bath coating in Combe Martin, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and safety for older or less mobile people, we can generally put it right, whatever the material.
Big or small, you get the same one-year guarantee in Combe Martin and across Devon. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Combe Martin (EX34)
- County
- Devon
- Cover
- One year on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
A repair isn’t right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
What we work on
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
- Shower trays
- Acrylic baths
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
Read our prices page.
What non-slip bath coating costs
You will not pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- The type of damage
- How many areas need work
- Unusual colours or finishes
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- The material, if you know it
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Common problems we fix in Combe Martin
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What to look for in a quote
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
The process
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
If you are in Combe Martin and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Common questions in Combe Martin
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
How much does non-slip bath coating cost in Combe Martin?
We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Landlords, agents and businesses in Combe Martin
If you manage property in Combe Martin, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Also near Combe Martin
Also in Combe Martin
Where we work around Combe Martin
Combe Martin is about 9 miles north of Barnstaple, in Devon. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Combe Martin is one of 586 places in Devon we cover.
We work across EX34 and the streets around it. From High Street, Mill Meadow and Water Terrace or anywhere nearby, a technician can come to you. Close by, we cover Berrynarbor (2 miles west), Kentisbury (2 miles south-east), Patchole (3 miles south-east), East Down (3 miles south) and Hele (3 miles west). Larger places within reach include Barnstaple (9 miles south), Bideford (15 miles south-west), Ilfracombe (4 miles west), Braunton (9 miles south-west), Newport (9 miles south) and South Molton (15 miles south-east).
What’s near Combe Martin
Typical jobs here are in homes near Castle Inn, Combe Martin Primary School and Church of St Peter Ad Vincula and the streets around them. Nearby you’ll also find Watermouth Castle (2.5 miles west) and Combe Martin Museum (0.6 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
