Greater London · England
Non-slip bath & shower coating in Coombe, Greater London
Clear non-slip coatings for baths and shower trays in Coombe, carried out at your home and guaranteed for a year.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Fixed prices from your pictures
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
Take a look at our pricing.
How we handle non-slip bath coating in Coombe
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on enamelled baths, wet room floors (ask us) and acrylic baths, and the jobs we see most are a bath or tray that is slippery when wet and worn-out textured areas.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Coombe (KT2, KT3, SW20)
- Area hub
- Greater London
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a few hours, tidy-up included.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Before we arrive
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Prices and what affects them
You’ll know the full cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- What the surface is made of
- How easy the damage is to reach
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Phone pictures are fine. Just make sure we can see:
- Where you are, by postcode
- One sharp close-up of the damage
- One picture of the whole bath or shower tray
- The material, if you know it
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What else we do in Coombe
Honest limits
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Coombe
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Coombe and nearby
Coombe is about 1 mile north of New Malden, in Greater London. Anywhere in KT2, we come to you. Coombe is one of 764 places in Greater London where we work. You can also see our page for London, about 9 miles away.
Every address in KT2, KT3 and SW20 is covered. That includes homes on West Road, Crown Road and Traps Lane and the roads around them. Close by, we cover Motspur Park (1 mile south-east), Coombe Hill (1 mile north), Kingston Vale (1 mile north-east), Norbiton (1 mile south-west) and New Malden (1 mile south). Larger places within reach include London (9 miles north-east), City of Westminster (8 miles north-east), Marylebone (8 miles north-east), Kensington (6 miles north-east), St Pancras (10 miles north-east) and Shoreditch (11 miles north-east).
Around Coombe
We visit homes around Coombe Girls' School, Coombe Hill Junior School and Canbury School and the streets around them. Nearby too are Cottenham Park (1.2 miles east), Christ Church New Malden (0.9 miles south) and The Royal Oak Public House (0.8 miles south). Coombe’s nearest station is Norbiton station, roughly 1 mile south-west of the centre. Well-known places in the area include Municipal Borough of Malden and Coombe (1.3 miles south) and Kingston Hospital (0.8 miles west). Open spaces near Coombe include Kew Gardens Lake and Kingston Hill Road area.
Common problems we fix in Coombe
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
People normally call us after spotting one of these:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
Before booking anyone
- If travel is included in the price
- When it can be used again
- Whether cleaning and preparation are in the price
- How your room will be protected
Coombe questions
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
About our accreditations · Every repair comes with a one-year guarantee.
