North Lanarkshire · Scotland
Non-Slip Bath Coating for Crindledyke homes
Non-slip bath coating in and around Crindledyke: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
Non-slip bath coating in Crindledyke, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Our technicians work on shower trays, wet room floors (ask us) and acrylic baths, and the jobs we see most are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Crindledyke (ML2)
- Area hub
- North Lanarkshire
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Crindledyke
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Every repair guaranteed for a year
See our full price list.
Common questions in Crindledyke
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for non-slip bath coating in Crindledyke?
We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Landlord and trade work in Crindledyke
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Signs you need non-slip bath coating in Crindledyke
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Clients generally contact us about:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Before you book anyone
- What aftercare is recommended
- How changes to the job are handled
- Whether the colour is mixed to match
- When it can be used again
Covering Crindledyke
Crindledyke is about 2 miles east of Wishaw, in North Lanarkshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Crindledyke is one of 89 places in North Lanarkshire we cover. Our jobs stretch from Crindledyke to Glasgow (about 16 miles away).
Here we cover the ML2 postcode area. Jobs here include addresses on Firtree Place, Alcath Road and Bonkle Road. Other places close to Crindledyke include Newmains (1 mile west), Bonkle (1 mile north-east), Morningside (1 mile south), Cambusnethan (1 mile south-west) and Chapel (1 mile south). Within a short drive, we also cover Motherwell (4 miles west), Cumbernauld (12 miles north-west), Coatbridge (8 miles north-west), Airdrie (7 miles north-west), Bellshill (6 miles west) and Kilsyth (15 miles north-west).
Landmarks near Crindledyke
We visit homes around Bonkle Parish Church and Coltness High School and the streets around them. Crindledyke’s nearest station is Cleland station, roughly 1.9 miles north-west. A little further out are Shotts Heritage Centre (3.8 miles north-east) and Murdostoun Castle (0.5 miles north). Not far away are Baron's Haugh RSPB Reserve and Allanton House lake.
Places near Crindledyke
Other services in Crindledyke
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Getting a price
Most customers in Crindledyke get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
Prices and what affects them
A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- What kind of damage it is
- How many areas need work
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can take the pictures on your phone. Ensure they show:
- A wider photo showing the whole bath or shower tray
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Any details about the material
To get a price, send two or three pictures using our quote form or ring us. We will say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
