Highland · Scotland
Non-slip bath & shower coating in Cromarty, Highland
Fixed-price non-slip bath coating in Cromarty and the surrounding area, generally in one visit and guaranteed for a year.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Cromarty
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can typically put it right, on shower trays, wet room floors (ask us) and acrylic baths alike.
A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Cromarty (IV11)
- Region
- Highland
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about non-slip bath coating in Cromarty
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Repair or replace in Cromarty?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there is no premium for Cromarty. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Normally one visit, start to finish
- Every repair guaranteed for a year
Read our pricing.
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Other services in Cromarty
Cromarty and the surrounding area
Cromarty is about 9 miles north-west of Nairn, in Highland. We visit homes and businesses in Cromarty, so you don’t need to take anything anywhere. We work in 253 places in Highland.
We cover every part of the IV11 postcode area. That includes homes on High Street, Allan Square and Denoon Place and the roads around them. With the A832 and B9163 close by, Cromarty is simple for us to get to. If you’re just outside Cromarty, we cover Nigg (3 miles north), Davidston (3 miles south-west), Pitcalnie (3 miles north), Barbaraville (4 miles north-west) and Kilmuir (4 miles north-west). Within a short drive, we also cover Nairn (9 miles south-east), Cradlehall (14 miles south), Tain (9 miles north), Alness (8 miles west), Dornoch (14 miles north) and Invergordon (5 miles west). Some remote addresses need extra planning, so it’s best to call first.
Local landmarks in Cromarty
Around Cromarty, we work in homes near Cromarty and the streets around them. Well-known places in the area include Cromarty Courthouse Museum (within half a mile east) and County Community Hospital (4.4 miles west). For a walk, there is Udale Bay RSPB reserve.
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Acrylic baths
- Resurfaced baths
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What affects the price in Cromarty
You’ll know the full cost before booking. We look at:
- How hard the colour is to match
- Doing more than one item at once
- The material and finish
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- What it’s made of, if you know
- A close-up of the damage, in focus
- A photo taken from further back
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job without visiting.
When to call us in Cromarty
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Comparing quotes
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the pictures show
- How your room will be protected
- The length of the guarantee and what it covers
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a morning or an afternoon.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, usually overnight.
Getting ready for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
