Cornwall · England
Non-slip bath & shower coating in Cubert, Cornwall
Fixed-price non-slip bath coating in Cubert and the surrounding area, done in a single visit in most cases.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Cubert
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can help, whatever the material.
We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Cubert (TR8)
- Area hub
- Cornwall
- Cover
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Cubert
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Look out for any of the following:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
What to look for in a quote
- How soon you can use it again
- Who turns up on the day
- Whether they match the colour on site
- What protection goes down before work starts
What non-slip bath coating costs
We price every job individually, from your pictures. What matters most is:
- How many areas need work
- The colour and finish to match
- What kind of damage it is
- Any earlier repairs that need removing first
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- One picture of the whole bath or shower tray
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
For a price in Cubert, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
FAQs for Cubert
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What does non-slip bath coating cost?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your TR8 postcode.
Are there extra charges for Cubert?
There is no separate call-out charge. Your fixed quote includes everything.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
What you get with us
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
Read our prices page.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take a few hours, and we’ll keep you posted as we go.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Towns and villages near Cubert
Also in Cubert
What a repair cannot fix
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
Cubert and nearby
Cubert is about 3 miles south-west of Newquay, in Cornwall. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 644 places in Cornwall.
Our visits in TR8 are booked in the same way as anywhere else. From Lanlovie Meadow, Ellenglaze Court and Chynowen Parc or a nearby road, we can come to you. We also cover the places around Cubert: Holywell (1 mile north-west), Trevowah (1 mile north), Reen Manor (2 miles south), Goonhavern (3 miles south) and Perranporth (3 miles south-west). Within a short drive, we also cover Truro (8 miles south), Newquay (3 miles north-east), St Austell (15 miles east), Camborne (14 miles south-west), Redruth (11 miles south-west) and Rosewarne (14 miles south-west).
What’s near Cubert
In Cubert, that means homes near Church of St Cubert and Cubert School, among other places. For rail, the closest station is Newquay station, about 3 miles north-east. Well-known places in the area include Newquay Community Hospital (2.9 miles north-east) and Gallery Of Old Newquay (2.7 miles north-east).
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
