Cornwall · England
Non-Slip Bath Coating for Cury homes
Non-slip bath coating in Cury without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
Non-slip bath coating at your home in Cury
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for resurfaced baths that are now too smooth and safety for older or less mobile people, across wet room floors (ask us), acrylic baths and resurfaced baths.
Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Cury (TR12)
- Area hub
- Cornwall
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Cury
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, including clearing up.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
What non-slip bath coating costs
We give every job a fixed price from pictures. These are the things that affect it:
- The material
- The type of damage
- Whether we combine several jobs
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
You can generally get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Most customers in Cury get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Common problems we fix in Cury
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- What the guarantee covers, and for how long
- Aftercare advice
- How long it needs to cure
- Whether the colour is mixed to match
Towns and villages near Cury
Also in Cury
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Repair or replace in Cury?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why choose Surface Doctor in Cury
- No extra charge for your area
- Nothing taken out or refitted
- Work done at your home or business
- We will tell you if it’s not worth repairing
See our pricing.
Where we work around Cury
Cury is about 4 miles south of Helston, in Cornwall. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Cury is one of 644 places in Cornwall we cover.
Jobs in TR12 are booked in the same way as anywhere else. Jobs here include addresses on Church Road, Parc Enys and Parknoweth. Other places close to Cury include White Cross (1 mile north-east), Cross Lanes (1 mile east), Mullion (1 mile south), Meaver (2 miles south) and Berepper (2 miles north-west). Larger places within reach include Falmouth (10 miles north-east), Camborne (12 miles north), Redruth (13 miles north), Penzance (14 miles west), Helston (4 miles north) and Hayle (12 miles north-west).
Local landmarks in Cury
Around Cury, we work in homes near St Corentine’s Church, Mullion School and Cury CofE Primary School and the streets around them. A little further out are Helston Castle (4 miles north-west) and Helston Community Hospital (3.3 miles north). Open spaces near Cury include Goonhilly Downs and The Loe.
About our accreditations · Every repair comes with a one-year guarantee.
