South Lanarkshire · Scotland

Non-Slip Bath Coating in Dalserf

Our repair technicians come to Dalserf for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Dalserf

Non-slip bath coating at your home in Dalserf

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We’re frequently asked to fix resurfaced baths that are now too smooth and worn-out textured areas, in resurfaced baths, shower trays and wet room floors (ask us).

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Dalserf (ML9)
Region
South Lanarkshire
Warranty
One year on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we do, step by step

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we’ll keep you posted as we go.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, typically overnight.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Advice

Dalserf and nearby

Dalserf is about 2 miles east of Larkhall, in South Lanarkshire. Jobs in Dalserf are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Dalserf is one of 139 towns and villages in South Lanarkshire where we work. Our jobs stretch from Dalserf to Glasgow (16 miles away).

Here we cover the ML9 postcode area. We regularly work on streets such as Kirk Road and Manse Brae and the roads around them. Neighbouring places we cover include Ashgill (1 mile south-west), Waterloo (1 mile north), Overtown (1 mile north), Netherburn (2 miles south) and Swinhill (2 miles south-west). Further out, we also cover East Kilbride (11 miles west), Hamilton (6 miles north-west), Cambuslang (11 miles north-west), Uddingston (9 miles north-west), Blantyre (8 miles north-west) and Carluke (3 miles east).

Landmarks near Dalserf

Typical jobs here are in homes near Larkhall Academy and Dalserf Kirk. Dalserf’s nearest station is Larkhall station, roughly 2.4 miles west. Further afield, we also cover the area around Mauldslie Castle (0.5 miles east) and Law Hospital (2.7 miles north-east). Not far away are Allanton House lake and Baron's Haugh RSPB Reserve.

Map of Dalserf © OpenStreetMap contributors

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • The material and finish
  • Access to the area

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send pictures for a quote

You can take the photos on your phone. Ensure they show:

  • A wider photo showing the entire bath or shower tray
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • Where you are, by postcode

To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.

Landlords, agents and businesses in Dalserf

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

Your questions about non-slip bath coating in Dalserf

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Can you quote from photos?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What areas do you cover?

The entire UK, including all of South Lanarkshire. Send your postcode with your pictures and we will offer you dates.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Dalserf

  • Rooms protected and left tidy
  • Work done at your home or business
  • One visit for most repairs
  • One price list for the whole UK

Take a look at our prices page.

Honest limits

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

Do you need non-slip bath coating in Dalserf?

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The most common problems we are called about are:

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Comparing quotes

  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT
  • What happens if they find more damage
  • What protection goes down before work starts

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.