Norfolk · England

Non-slip bath & shower coating in Denver, Norfolk

Our repair technicians come to Denver for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Denver

About our non-slip bath coating in Denver

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair resurfaced baths, enamelled baths and shower trays, and the jobs we see most are a bath or tray that is slippery when wet and safety for older or less mobile people.

Big or small, you get the same one-year guarantee in Denver and across Norfolk. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Denver (PE38)
County
Norfolk
Cover
A year, on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

When a repair is not the answer

Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths

Repair or replace in Denver?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Honest advice, even when it means no job
  • A year’s guarantee on all work
  • One price list for the entire UK
  • Work done at your home or business

Take a look at our pricing.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

When to call us in Denver

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Denver contact us include:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • How your room will be protected
  • How long it needs to cure
  • Whether there are any call-out or travel charges
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Questions from Denver

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before and we’ll plan for it.

How do I get a price for non-slip bath coating in Denver?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

What information do you need?

Send photos through the quote form or call 0345 017 0787.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

What happens next?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

What we do, step by step

Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we will keep you posted as we go.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Let us know if it has been repaired before
  • Keep a parking space free if you can

How to get a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Read more

Prices and what affects them

There is no charge for travel to Denver. The price comes down to:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Previous DIY repairs that have to come out

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Send photos for a quote

Phone photos are fine. Ensure they show:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • The material, if you know it
  • Any earlier repairs or coatings

For a price in Denver, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

For landlords and businesses

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Covering Denver

Denver is about 10 miles south-east of Wisbech, in Norfolk. Anywhere in PE38, we carry out the work at your property. Our repair technicians cover 797 places across Norfolk, from the larger towns to small villages. We work right across the region, from Denver to London (about 78 miles away).

We work across PE38. Jobs here include addresses on Downham Road, Beechey Close and Sandy Lane and the roads around them. Close by, we cover Downham Market (1 mile north), Bexwell (1 mile north-east), Salters Lode (2 miles west), Downham West (2 miles north-west) and Hilgay (2 miles south). Further out, we also cover King's Lynn (12 miles north), Swaffham (14 miles east), Fairstead (11 miles north), West Lynn (11 miles north), North Lynn (12 miles north) and North Wootton (14 miles north).

What’s near Denver

Around Denver, we work in homes near Denver Voluntary Controlled Primary School, Downham Market College and The Bell Inn, among other places. Denver’s nearest station is Downham Market station, roughly 1.2 miles north-west of the centre. A little further out are Discover Downham (0.8 miles north).

Map of Denver © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.