East Ayrshire · Scotland
Non-Slip Bath Coating for Dunlop homes
Fixed-price non-slip bath coating in Dunlop and the surrounding area, done in a single visit in most cases.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Non-slip bath coating in Dunlop without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We work on acrylic baths, shower trays and resurfaced baths, and common reasons people get in touch are bath mats that harbour mould or get forgotten and worn-out textured areas.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Dunlop (KA3)
- County
- East Ayrshire
- Warranty
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Dunlop
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- CHAS and Constructionline accredited
- Usually one visit, start to finish
- Same prices wherever you are
- One-year guarantee on every repair
Take a look at our full price list.
What else we do in Dunlop
Dunlop and nearby
Dunlop is about 7 miles north of Kilmarnock, in East Ayrshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Dunlop is one of 53 towns and villages in East Ayrshire where we work. You can also see our page for Glasgow, about 14 miles away.
We work across the KA3 postcode area and the streets around it. Streets in the area include Station Road, Main Street and Livingston Terrace, and we cover them all. Close by, we cover Burnhouse (2 miles west), Barony and Castle of Corsehill (2 miles south), Lugton (2 miles north), Stewarton (2 miles south) and Greenhills (2 miles west). Within a short drive, we also cover Kilmarnock (7 miles south), Annanhill (7 miles south), Galston (10 miles south-east), Mauchline (15 miles south-east), New Farm Loch (7 miles south) and Bonnyton (7 miles south).
Around Dunlop
Locally, our jobs take us to homes close to Clandeboye School, Parish Church and Stewarton Academy. Dunlop has its own railway station: Dunlop station. Further afield, we also cover the area around Dunlop Castle (1.1 miles east) and Stewarton Museum (2.3 miles south). For a walk, there’s Blae Loch and Dunlop Hill.
Do you need non-slip bath coating in Dunlop?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Most people contact us when they notice one of these:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- What preparation is included
- What protection goes down before work starts
Honest limits
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Dunlop
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
What non-slip bath coating costs
Every quote is fixed and free. What we take into account:
- The material and finish
- Access to the area
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
You can typically get a fixed quote without us visiting. To make it quick:
- One picture of the entire bath or shower tray
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You will get a fixed price, not an estimate.
Work for landlords and builders
For anyone letting property in or around Dunlop, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Questions from Dunlop
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What does non-slip bath coating cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will I see the coating?
Very little: the treated area looks slightly matt.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Dunlop.
What we do, step by step
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes a few hours. The room is left tidy and ready to use once it has cured.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
How to prepare
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
