Herefordshire · England

Non-Slip Bath Coating in Eardisley

Non-slip bath coating in Eardisley without the cost of replacing. Get a fixed price from your photos, then we come to you.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Eardisley?

About our non-slip bath coating in Eardisley

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our repair technicians work on acrylic baths, resurfaced baths and enamelled baths, and the jobs we see most are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Eardisley (HR3)
Region
Herefordshire
Warranty
One year on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Why book with us

  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • Everything repaired in place
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing.

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • What kind of damage it is
  • How many areas need work
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Phone pictures are fine. Just make sure we can see:

  • Where you are, by postcode
  • One picture of the whole bath or shower tray
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

Most clients in Eardisley get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

When to call us in Eardisley

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Look out for any of the following:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people

Comparing quotes

  • What aftercare is recommended
  • How the room is protected while they work
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges

Our hiring checklist

Questions from Eardisley

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

What happens after I send pictures?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How do I get a price for non-slip bath coating in Eardisley?

We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Where we work around Eardisley

Eardisley is about 14 miles north-west of Hereford, in Herefordshire. Whether you are in the middle of Eardisley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 255 towns and villages across Herefordshire, from the larger towns to small villages. We work right across the region, from Eardisley to Birmingham (about 52 miles away).

We work across HR3 and the streets around it. You will find streets such as Church Road, Eastfield and Almeley Road, all of which we cover. Other places close to Eardisley include Lower Welson (1 mile west), Dukes (1 mile north-west), Winforton (2 miles south-west), Millhalf (2 miles south-west) and Whitney-on-Wye (3 miles south-west). We also work in nearby towns such as Hereford (14 miles south-east), Leominster (13 miles north-east), Redhill (14 miles south-east), Newton Farm (13 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).

Local landmarks in Eardisley

Typical jobs here are in homes near Church of St Mary Magdalene, New Strand pub and Eardisley CofE Primary School and the streets around them. Well-known places in the area include Eardisley Castle (within half a mile south). Green spaces nearby include Birches Farm and Merbach Hill.

Map of Eardisley © OpenStreetMap contributors

The process

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, including clearing up.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a free quote

Related advice

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

When a repair isn’t the answer

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.