Somerset · England

Non-slip bath & shower coating in Egford, Somerset

Local non-slip bath coating for Egford: photo quotes, tidy work and a year’s guarantee.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Egford

Landlord and trade work in Egford

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Non-slip bath coating in Egford, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, across acrylic baths, wet room floors (ask us) and shower trays.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Egford (BA11)
Area hub
Somerset
Warranty
12 months on all our work
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

About Egford

Egford is about 1 mile west of Frome, in Somerset. From the centre of Egford to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 640 places across Somerset.

Jobs in BA11 are booked in the same way as anywhere else. We also travel to Hapsford (1 mile north), Frome (1 mile east), Little Keyford (1 mile south-east), Tytherington (2 miles south) and Ridgeway (2 miles south-west). Within a short drive, we also cover Wells (14 miles west), Midsomer Norton (7 miles north-west), Shepton Mallet (9 miles west), Radstock (6 miles north-west), Wincanton (13 miles south) and Castle Cary (12 miles south-west).

Around Egford

Locally, our jobs take us to homes close to Trinity Church of England First School, Church of the Holy Trinity and North Hill House School. The nearest railway station is Frome station, about 1.5 miles east. Further afield, we also cover the area around Nunney Castle (2.1 miles south-west). The countryside around Egford includes Orchardleigh Lake and Vallis Vale.

Map of Egford © OpenStreetMap contributors

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.

What you get with us

  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted
  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK

See our prices page.

What affects the price in Egford

We charge the same across the UK, including Egford. What changes the price is:

  • Access to the area
  • The material
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

When you take your photos, these tips help us give you a firm price:

  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • The postcode, so we can plan the visit
  • The material, if you know it

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.

What happens on the day

We agree an arrival time beforehand. Once we’re there, the work takes a morning or an afternoon in most cases. We leave the room clean and you’ll know when it can be used.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Get a free quote

Read more

FAQs for Egford

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Do you work in Egford?

Yes, we do. We send a technician to Egford for every job, and the price is the same as everywhere else.

Are there extra charges for Egford?

There is no separate call-out charge. The fixed price covers the visit and the work.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is a repair better than a new one?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do you cover the whole of Somerset?

Across the UK. Our prices are the same everywhere.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Will I see the coating?

Very little: the treated area looks slightly matt.

Do you need non-slip bath coating in Egford?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a picture if you notice any of these:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Comparing quotes

  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the pictures show
  • A fixed quote, and whether VAT is included
  • When it can be used again

Choosing a repair company

What a repair cannot fix

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Materials we work on in Egford

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.