Cornwall · England
Non-Slip Bath Coating for Egloskerry homes
Clear non-slip coatings for baths and shower trays for homes and businesses in Egloskerry and across Cornwall. Free, fixed quotes from your pictures.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
How we handle non-slip bath coating in Egloskerry
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our repair technicians work on shower trays, enamelled baths and resurfaced baths, and common reasons people contact us are worn-out textured areas and bath mats that harbour mould or get forgotten.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Egloskerry (PL15)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
We work cleanly and quietly. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Egloskerry
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
What we’re called out for in Egloskerry
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- Whether cleaning and preparation are in the price
- If travel is included in the price
- Whether they match the colour on site
- How to look after the finish
Where we work around Egloskerry
Egloskerry is about 14 miles north of Liskeard, in Cornwall. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Egloskerry is one of 644 towns and villages in Cornwall where we work.
Our technicians cover all of the PL15 postcode area. Streets in the area include Well Meadow and Rail Way. Nearby, we also work in Hellescott (2 miles north-east), North Petherwin (2 miles north), Langore (2 miles east), Tregadillett (2 miles south-east) and Polyphant (3 miles south). Within a short drive, we also cover Liskeard (14 miles south), Launceston (4 miles east), Bude (13 miles north), Addington (13 miles south), Callington (12 miles south-east) and Newport (4 miles east).
Landmarks near Egloskerry
Our customers here include homes close to Egloskerry Primary School and Church of St Keria, among other places. Further afield, we also cover the area around Launceston Castle (3.9 miles east) and Launceston Rural Museum (3.7 miles south-east).
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Egloskerry
- Technicians who travel to you, UK-wide
- No extra charge for your area
- We leave the room as we found it
- We will tell you if it’s not worth repairing
Read our full price list.
What non-slip bath coating costs
We charge the same across the UK, including Egloskerry. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- What the surface is made of
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Send pictures for a quote
You can typically get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- One sharp close-up of the damage
- One picture of the whole bath or shower tray
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Nearby places to Egloskerry
More services for Egloskerry
Your questions about non-slip bath coating in Egloskerry
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What happens next?
We come back with a fixed quote, generally with dates to choose from. There is no obligation to book.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Do you cover Egloskerry?
Yes, we do. We send a technician to Egloskerry for every job, with no extra charge for travel.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will I see the coating?
Very little: the treated area looks slightly matt.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
