Plymouth · England
Non-Slip Bath Coating for Ernesettle homes
We travel to Ernesettle for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Ernesettle
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can normally put it right.
All our work comes with a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Ernesettle (PL5, PL6)
- County
- Plymouth
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price non-slip bath coating
We charge the same across the UK, including Ernesettle. The price reflects:
- How many areas need work
- The material and finish
- What kind of damage it is
- How easy the damage is to reach
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Make sure they show:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- One picture of the entire bath or shower tray
- The material, if you know it
Upload pictures of the damage and a wider shot of the entire item, and tell us you are in Ernesettle, and we’ll come back with a fixed quote.
Ernesettle questions
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What does non-slip bath coating cost?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Landlords, agents and businesses in Ernesettle
We’re used to working with agents and managing companies. Send the address, photos and access details.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Places near Ernesettle
What else we do in Ernesettle
When to call us in Ernesettle
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Questions to ask before you book
- How soon you can use it again
- Whether they match the colour on site
- How to look after the finish
- Who will actually do the work
Our work in Ernesettle
Ernesettle is about 2 miles north of North Prospect, in Plymouth. Jobs in Ernesettle are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 59 places across Plymouth, from the larger towns to small villages.
Every address in PL5 and PL6 is covered. From Kings Road, Parade Road and Marina Road or anywhere nearby, we can come to you. Other places close to Ernesettle include Honicknowle (1 mile south-east), King's Tamerton (1 mile south), Tamerton Foliot (1 mile north-east), St Budeaux (1 mile south) and Whitleigh (1 mile east). Within a short drive, we also cover Plymouth (3 miles south-east), Mannamead (3 miles south-east), Lipson (4 miles south-east), Mutley (3 miles south-east), Stoke (3 miles south) and Peverell (3 miles south-east).
What’s near Ernesettle
Our clients here include homes close to Ernesettle Community School, Bull & Bush pub and St Aidan and the streets around them. You’ll also find St Budeaux Foundation Church Of England Junior School (0.6 miles south), West Park Library (0.6 miles south-east) and Marine Academy Plymouth (0.9 miles south). Ernesettle’s nearest station is St Budeaux Victoria Road station, roughly 1.2 miles south. A little further out are Trematon Castle (3 miles south-west) and Armada Centre (3.4 miles south-east).
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon, tidy-up included.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
Repair or replace in Ernesettle?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Ernesettle customers choose us
- No need to remove anything
- Work done at your home or business
- Honest advice, even when it means no job
- Every repair guaranteed for a year
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
