Hertfordshire · England

Non-Slip Bath Coating in Flaunden

Non-slip bath coating in and around Flaunden: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Flaunden homes

About our non-slip bath coating in Flaunden

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with resurfaced baths that are now too smooth and safety for older or less mobile people, we can help, whatever the material.

We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Location
Flaunden (HP3)
County
Hertfordshire
Cover
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What non-slip bath coating costs

Each job gets its own fixed price. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • How many areas need work
  • How many items we do on one visit

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • Any details about the material
  • A wider photo showing the entire bath or shower tray
  • A clear, close picture of the problem area
  • Natural light rather than flash

If you’re in Flaunden and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

What we cannot put right

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

Where we work around Flaunden

Flaunden is about 3 miles north-east of Amersham, in Hertfordshire. From the centre of Flaunden to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 381 places in Hertfordshire. You can also see our page for London, about 23 miles away.

Postcode districts we cover here: HP3. Other places close to Flaunden include Belsize (1 mile east), Chenies (1 mile south), Latimer (2 miles south-west), Little Chalfont (3 miles south-west) and Chorleywood (3 miles south). We also work in nearby towns such as Watford (6 miles south-east), Hemel Hempstead (5 miles north-east), St Albans (9 miles north-east), Harpenden (11 miles north-east), Hatfield (14 miles east) and Borehamwood (11 miles east).

Local landmarks in Flaunden

Around Flaunden, we work in homes near St Clement Danes School, The Green Dragon pub and Church of St Mary Magdalene (Church of England), among other places. The closest station to Flaunden is Chalfont & Latimer station, roughly 2.4 miles south-west. A little further out are Amersham Fair Organ Museum (3.1 miles south-west) and Hemel Hempstead Hospital (4.5 miles north-east). For a walk, there is Sarratt Bottom nature reserve.

Map of Flaunden © OpenStreetMap contributors

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Tell us if there are stairs or a lift
  • Ensure the room can be ventilated
  • Tell us about parking, stairs or access

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Related advice

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Questions from Flaunden

What happens after I send pictures?

We review the photos and send a fixed quote with dates.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

What areas do you cover?

We work UK-wide, so Flaunden is covered. Our prices are the same everywhere.

Do you come to Flaunden?

Yes. We work across the UK and come to Flaunden and the rest of Hertfordshire. Send us photos for a fixed quote, or call 0345 017 0787.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, photos and access details.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Repairing versus replacing in Flaunden

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Flaunden

  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • Rooms protected and left tidy
  • One visit for most repairs

Read our pricing.

What we’re called out for in Flaunden

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a picture if you notice any of these:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Comparing quotes

  • Whether a trained technician does the job
  • How your room will be protected
  • Whether there are any call-out or travel charges
  • When it can be used again

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.