Warwickshire · England

Non-Slip Bath Coating in Flecknoe

Clear non-slip coatings for baths and shower trays for homes and businesses in Flecknoe and across Warwickshire. Free, fixed quotes from your pictures.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Flecknoe?

Non-slip bath coating at your home in Flecknoe

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, across shower trays, resurfaced baths and wet room floors (ask us).

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Where
Flecknoe (CV23)
Region
Warwickshire
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When to call us in Flecknoe

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people contact us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • What aftercare is recommended
  • Whether the colour is mixed to match
  • If travel is included in the price
  • A fixed price, and whether VAT is included

10 questions to ask before you book

Questions from Flecknoe

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

Will I see the coating?

Very little: the treated area looks slightly matt.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Flecknoe

  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do
  • Technicians who travel to you, UK-wide
  • Normally one visit, start to finish

See our prices page.

How the visit works

We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

How to get a price

If you’re in Flecknoe and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

When a repair is not the answer

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths

Prices and what affects them

We charge the same across the UK, including Flecknoe. The price reflects:

  • The material and finish
  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • The size and number of damaged areas

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection

To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Flecknoe and nearby

Flecknoe is about 3 miles west of Daventry, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Flecknoe is one of 324 towns and villages in Warwickshire where we work. You can also see our page for Birmingham, about 31 miles away.

Our visits in CV23 are booked in the same way as anywhere else. Streets in the area include Vicarage Road and Bush Hill Lane. Nearby, we also work in Upper Shuckburgh (1 mile south-west), Staverton (2 miles south-east), Grandborough (2 miles north-west), Braunston (2 miles north-east) and Hellidon (3 miles south). We also work in nearby towns such as Rugby (7 miles north), Warwick (14 miles west), Royal Leamington Spa (12 miles west), Leamington Spa (12 miles west), Kenilworth (15 miles west) and Southam (6 miles west).

Around Flecknoe

Around Flecknoe, we work in homes near St Mark. A little further out are Daventry Museum (3.8 miles east). Open spaces near Flecknoe include Badby Wood and Arbury Hill.

Map of Flecknoe © OpenStreetMap contributors

Landlord and trade work in Flecknoe

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.