Kirklees · England
Non-Slip Bath Coating in Flush House
Clear non-slip coatings for baths and shower trays in Flush House, carried out at your home and guaranteed for a year.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Non-slip bath coating in Flush House without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. We are often asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in wet room floors (ask us), shower trays and enamelled baths.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Flush House (HD9)
- County
- Kirklees
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need non-slip bath coating in Flush House
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Common reasons people in Flush House contact us include:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Comparing quotes
- How changes to the job are handled
- If travel is included in the price
- A fixed quote, and whether VAT is included
- When it can be used again
How we price non-slip bath coating
You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Any earlier repairs that need removing first
- How easy the damage is to reach
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- A clear, close picture of the problem area
- A wider photo showing the whole bath or shower tray
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Covering Flush House
Flush House is about 6 miles south of Huddersfield, in Kirklees. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 189 places across Kirklees. We work right across the region, from Flush House to Manchester (about 17 miles away).
We work across the HD9 postcode area. That includes homes on Flush House Lane and Roods Lane. Neighbouring places we cover include Holmbridge (1 mile south-east), Burnlee (1 mile east), Holme (1 mile south), Upperthong (1 mile north-east) and Wilshaw (1 mile north). We also work in nearby towns such as Huddersfield (6 miles north), Dewsbury (12 miles north-east), Batley (13 miles north-east), Mirfield (10 miles north-east), Liversedge (11 miles north-east) and Cleckheaton (12 miles north).
Near you in Flush House
Locally, our jobs take us to homes close to Church of St David, Hinchliffe Mill Junior and Infant School and Bridge Tavern. The closest station to Flush House is Brockholes station, roughly 3.3 miles north-east of the centre. Other landmarks nearby include Last Of The Summer Wine Exhibition (1.6 miles east) and St. Luke's Hospital (5 miles north). Open spaces near Flush House include Oldfield Hill.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Everything repaired in place
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
Take a look at our full price list.
What happens on the day
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a few hours, and you are welcome to carry on with your day while we work.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Getting a price
If you’re in Flush House and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Places near Flush House
Also in Flush House
Questions from Flush House
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What happens after I send pictures?
We come back with a fixed quote. There’s no obligation to book.
Which areas do you work in?
We cover the whole UK, including Flush House and the rest of Kirklees. Send your postcode with your photos and we will confirm dates.
Is there any odour?
Expect a mild smell while we’re working.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
