Hertfordshire · England

Non-Slip Bath Coating for Freezywater homes

Non-slip bath coating in Freezywater without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Freezywater

Freezywater: your questions answered

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before.

Are there extra charges for Freezywater?

We do not add a call-out fee. Your fixed quote includes everything.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What happens next?

You’ll get a fixed quote back. You’re under no obligation.

Do you work in Freezywater?

We do. Technicians travel to Freezywater from across the region, and the price is the same as everywhere else.

Non-slip bath coating in Freezywater, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and safety for older or less mobile people, on enamelled baths, resurfaced baths and acrylic baths.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Freezywater (EN3, EN8, EN1)
Region
Hertfordshire
Warranty
12 months on all our work
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What affects the price in Freezywater

You’ll know the full cost before you book. We take into account:

  • How easy the damage is to reach
  • The material
  • The colour and finish to match
  • The type of damage

A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Quotes from your photos

Phone pictures are fine. Just ensure we can see:

  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

When a repair is not the answer

A repair is not right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Resurfaced baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • No extra charge for your area
  • CHAS and Constructionline accredited
  • Normally one visit, start to finish
  • Rooms protected and left tidy

Take a look at our pricing.

Common problems we fix in Freezywater

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

The things customers usually mention when they call are:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

What your quote should include

  • When it can be used again
  • What happens if the damage is worse than the photos show
  • Whether a trained technician does the job
  • How the room is protected while they work

How to compare quotes

How it works

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a few hours, and we will tell you if anything changes.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know about parking or access
  • Keep a parking space free if you can

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

Covering Freezywater

Freezywater is about 2 miles west of Waltham Abbey, in Hertfordshire. Jobs in Freezywater are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover all 381 towns and villages in Hertfordshire. We work right across the region, from Freezywater to London (about 13 miles away).

Postcode districts we cover here: EN3, EN8 and EN1. Streets in the area include Park Road, Unity Road and Holly Road. Main roads around Freezywater include the M25 and A1010, which makes travel easy. We also travel to Enfield Lock (1 mile south), Enfield Wash (1 mile south-west), Bullsmoor (1 mile west), Waltham Cross (1 mile north) and Enfield Island Village (1 mile south-east). Further out, we also cover St Albans (14 miles west), Welwyn Garden City (11 miles north-west), Hoddesdon (5 miles north), Cheshunt (3 miles north), Hatfield (10 miles north-west) and Hertford (9 miles north).

Around Freezywater

In Freezywater, that means homes near Oasis Academy Enfield, Ss Peter and Paul Church and Aylands School. Also close by are The Moon and Cross pub (0.6 miles north), Keys Meadow Primary School (less than half a mile east) and Gunpowder Park (1.2 miles east). There’s a railway station in Freezywater itself: Enfield Lock station. Nearby you’ll also find Municipal Borough of Enfield (2.6 miles west) and Edmonton Green Shopping Centre (3.7 miles south). Open spaces near Freezywater include Lippitts Hill and Ainslie Wood.

Map of Freezywater © OpenStreetMap contributors

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Landlords, agents and businesses in Freezywater

If you manage property in Freezywater, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.