Hertfordshire · England
Non-Slip Bath Coating in Bullsmoor
Our repair technicians come to Bullsmoor for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What we’re called out for in Bullsmoor
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Comparing quotes
- What prep work is covered
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
About our non-slip bath coating in Bullsmoor
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for resurfaced baths that are now too smooth and worn-out textured areas, on wet room floors (ask us), acrylic baths and shower trays.
Whatever the size of the job, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Bullsmoor (EN3, EN1, EN8)
- Region
- Hertfordshire
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Bullsmoor
A fixed quote means you know the cost before booking. We look at:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- One picture of the whole bath or shower tray
- The postcode, so we can plan the visit
- What it’s made of, if you know
For a price in Bullsmoor, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Repairing versus replacing in Bullsmoor
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
What you get with us
- Nothing taken out or refitted
- A fixed quote before you book
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list.
FAQs for Bullsmoor
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You are under no obligation.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Most customers in Bullsmoor get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Also near Bullsmoor
Other services in Bullsmoor
Bullsmoor and nearby
Bullsmoor is about 2 miles north-east of Enfield, in Hertfordshire. We visit customers in Bullsmoor and nearby villages, so there is no workshop to go to. We cover all 381 towns and villages in Hertfordshire. You can also see our page for London, about 12 miles away.
All of EN3, EN1 and EN8 is covered, from the main roads to the quietest streets. Whether you live on Capel Road, Unity Road and Kempe Road or anywhere nearby, we can come to you. Bullsmoor sits on or near the M25, which makes travel easy. Other places close to Bullsmoor include Bulls Cross (1 mile west), Enfield Wash (1 mile south-east), Freezywater (1 mile east), Enfield Highway (1 mile south) and Enfield Lock (1 mile south-east). We also work in nearby towns such as Watford (15 miles west), St Albans (13 miles north-west), Welwyn Garden City (11 miles north-west), Hoddesdon (6 miles north), Hatfield (10 miles north-west) and Hertford (9 miles north).
Landmarks near Bullsmoor
In Bullsmoor, that means homes near Aylands School, Honilands Primary School and The Pied Bull Public House. Also close by are St George's Church (less than half a mile south-east), Gunpowder Park (1.9 miles east) and The Lea Valley Academy (less than half a mile north-east). Bullsmoor has its own railway station: Turkey Street station. Further afield, we also cover the area around Edmonton Green Shopping Centre (3.6 miles south) and Municipal Borough of Enfield (1.9 miles west). The countryside around Bullsmoor includes Ainslie Wood and Lippitts Hill.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
