Lancashire · England
Non-slip bath & shower coating in Fulwood, Lancashire
Non-slip bath coating for Fulwood, without a refit. Send us photos for a fixed price, then we come to you.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What non-slip bath coating costs
There is no area surcharge for Fulwood. What changes the price is:
- How many items we do on one visit
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- The material, if you know it
If you’re in Fulwood and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
How we handle non-slip bath coating in Fulwood
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. We work on resurfaced baths, enamelled baths and acrylic baths, and common reasons people get in touch are worn-out textured areas and bath mats that harbour mould or get forgotten.
Whatever the size of the job, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Fulwood (PR2, PR4)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours. Before we go, we will explain how long to leave it and how to care for it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Fulwood and the surrounding area
Fulwood is about 2 miles north-west of Preston, in Lancashire. Jobs in Fulwood are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Fulwood is one of 482 places in Lancashire where we work. Our nearest city page is Liverpool, about 28 miles away.
We cover every part of PR2 and PR4 and the streets around it. That includes homes on Black Bull Lane, Ridgeford Gardens and Greyfriars Crescent and the roads around them. Main roads around Fulwood include the A6 and B5411, so getting to you is simple. Other places close to Fulwood include Cadley (1 mile south), Sharoe Green (1 mile north-east), Ingol (1 mile west), Plungington (1 mile south) and Ashton-on-Ribble (1 mile south). Further out, we also cover Chorley (10 miles south), Lytham St Anne's (12 miles west), Bamber Bridge (5 miles south-east), Accrington (15 miles east), Leyland (6 miles south) and Clitheroe (14 miles north-east). Fulwood is one of the larger places we cover in Lancashire.
Around Fulwood
In Fulwood, that means homes near St Martin, Lancashire Education Medical Services and Queen's Drive Primary School, among other places. You will also find Haslam Park (1 mile south-west) and Fulwood Academy (within half a mile north). The closest station to Fulwood is Preston station, about 2.1 miles south of the centre. A little further out are Royal Preston Hospital (0.6 miles north-east) and Tulketh (1.6 miles south). The countryside around Fulwood includes Brockholes.
Nearby places to Fulwood
More services for Fulwood
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Fulwood use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Common questions in Fulwood
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What does non-slip bath coating cost?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your PR2 postcode.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Do you come to Fulwood?
Yes. We cover the whole UK and travel to Fulwood. Send pictures and we’ll quote, or call 0345 017 0787.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Which areas do you work in?
The whole UK, including all of Lancashire. Send your postcode with your pictures and we will offer you dates.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Repair or replace in Fulwood?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why us?
- Rooms protected and left tidy
- Normally one visit, start to finish
- Nothing taken out or refitted
- One price list for the whole UK
See our prices page.
Common problems we fix in Fulwood
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Questions to ask before you book
- How changes to the job are handled
- What aftercare is recommended
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
