Lancashire · England
Non-Slip Bath Coating in Bamber Bridge
We travel to Bamber Bridge for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
How we price non-slip bath coating
We price every job individually. What matters most is:
- The colour and finish to match
- The type of damage
- The size and number of damaged areas
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One sharp close-up of the damage
- What it’s made of, if you know
- A wider photo showing the whole bath or shower tray
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
How we handle non-slip bath coating in Bamber Bridge
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. If you’re dealing with bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can help, on acrylic baths, enamelled baths and wet room floors (ask us) alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Bamber Bridge (PR5, PR6, PR1)
- County
- Lancashire
- Warranty
- A year, on every repair
- Price
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Open a window if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Repairing versus replacing in Bamber Bridge
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Bamber Bridge. The job itself decides the price: the material, the amount of damage and how many items.
Why Bamber Bridge clients choose us
- Same prices wherever you are
- Everything repaired in place
- Most jobs done in one visit
- One-year guarantee on every repair
See our pricing.
Landlords, agents and businesses in Bamber Bridge
Landlords, letting agents and housing providers in Bamber Bridge use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
When we would advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
Common problems we fix in Bamber Bridge
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What to look for in a quote
- How changes to the job are handled
- What preparation is included
- What the guarantee covers, and for how long
- How soon you can use it again
Bamber Bridge and the surrounding area
Bamber Bridge is about 14 miles north-west of Bolton, in Lancashire. Jobs in Bamber Bridge are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Bamber Bridge is one of 482 places in Lancashire where we work. Our jobs stretch from Bamber Bridge to Manchester (about 25 miles away).
Our visits in PR5, PR6 and PR1 are booked in the same way as anywhere else. Streets in the area include Station Road, Church Road and Lostock Square, all of which we cover. Main roads around Bamber Bridge include the A6 and A49, which makes travel easy. We also cover the places around Bamber Bridge: Lostock Hall (1 mile west), Walton-le-Dale (1 mile north), Higher Walton (1 mile north-east), Cuerden (1 mile south) and Clayton Brook (2 miles south-east). Within a short drive, we also cover Preston (3 miles north-west), Chorley (6 miles south), Lytham St Anne's (14 miles west), Accrington (12 miles east), Leyland (3 miles south-west) and Fulwood (5 miles north-west). Bamber Bridge is one of the larger places we cover in Lancashire.
Around Bamber Bridge
Around Bamber Bridge, we work in homes near The Pump & Truncheon pub, St Mary's and St Benedict's Roman Catholic Primary School and Church of the Blessed Virgin Mary and the streets around them. There is a railway station in Bamber Bridge itself: Bamber Bridge station. Other landmarks nearby include Fishergate Shopping Centre (2.6 miles north-west) and Preston Royal Infirmary (2.8 miles north-west). Green spaces nearby include Brockholes.
Common questions in Bamber Bridge
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
Places near Bamber Bridge
More services for Bamber Bridge
About our accreditations · Every repair comes with a one-year guarantee.
