North Yorkshire · England

Non-slip bath & shower coating in Ganton, North Yorkshire

Non-slip bath coating in Ganton without the cost of replacing. Send us pictures for a fixed quote, then book a visit.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Ganton

Ganton: your questions answered

Do you come to Ganton?

Yes. We cover the entire UK and come to Ganton and the rest of North Yorkshire. Send photos and we’ll quote, or call 0345 017 0787.

Will the price change on the day?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Can I get a quote without a visit?

In nearly every case. If pictures do not show enough, we will ask for another angle.

Do you cover the entire of North Yorkshire?

The entire UK, including all of North Yorkshire. Just include your postcode and we will offer you dates.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

How do I get a price for non-slip bath coating in Ganton?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Non-slip bath coating in Ganton without replacing anything

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on enamelled baths, acrylic baths and wet room floors (ask us).

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Ganton (YO12)
County
North Yorkshire
Cover
One year on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Covering Ganton

Ganton is about 7 miles south-west of Scarborough, in North Yorkshire. From the centre of Ganton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 626 towns and villages in North Yorkshire. Our nearest city page is Leeds, about 50 miles away.

Jobs in YO12 are booked in the same way as anywhere else. Whether you live on Main Street and Woodside Road or anywhere nearby, we can come to you. Neighbouring places we cover include Binnington (1 mile north-east), Willerby (2 miles north-east), Sherburn (2 miles west), Staxton (2 miles north-east) and Foxholes (3 miles south-east). Further out, we also cover Scarborough (7 miles north-east), Falsgrave (7 miles north-east), Malton (13 miles west), Filey (8 miles east), Pickering (12 miles west) and Northstead (8 miles north).

What’s near Ganton

We visit homes around Church of St Nicholas, among other places. The nearest railway station is Seamer station, roughly 4.8 miles north-east of the centre. Well-known places in the area include Ayton Castle (4.6 miles north).

Map of Ganton © OpenStreetMap contributors

When we would advise against a repair

We will not take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths

For landlords and businesses

If you manage property in Ganton, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why book with us

  • Repair technicians who travel to you, UK-wide
  • Typically one visit, start to finish
  • Every repair guaranteed for a year
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing.

Common problems we fix in Ganton

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The things clients normally mention when they call include:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Comparing quotes

  • What aftercare is recommended
  • If travel is included in the price
  • Who turns up on the day
  • What protection goes down before work starts

10 questions to ask before you book

What affects the price in Ganton

There is no charge for travel to Ganton. The price depends on:

  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • The material and finish

We charge the same wherever you are, so there is no premium for Ganton. The job itself decides the price: how much damage, what it’s made of and how many items.

Send photos for a quote

Before you send pictures, a few simple things make all the difference:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Any details about the material
  • A picture taken from further back

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote without visiting.

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

What happens on the day

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours. Before we go, we’ll explain when it can be used and how to look after it.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Let us know about parking or access
  • Open a window if you can
  • Mention any earlier repairs or resurfacing

Get a quote

Send us pictures of the damage and a wider shot of the entire item, with your YO12 postcode, and we will reply with a fixed quote.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.