Highland · Scotland

Non-slip bath & shower coating in Glenancross, Highland

Non-slip bath coating in Glenancross without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Glenancross?

Non-slip bath coating in Glenancross without replacing anything

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. If you’re dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can usually put it right, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Glenancross (PH40)
Area hub
Highland
Guarantee
12 months on all our work
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Landlord and trade work in Glenancross

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Honest limits

In fairness, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

How the visit works

Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Tell us about parking, stairs or access
  • Point us to the nearest place to park

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote.

Get a free quote

Advice

What non-slip bath coating costs

There’s no area surcharge for Glenancross. What changes the price is:

  • How much damage there is
  • Any earlier repairs that need removing first
  • What the surface is made of
  • How many items we do on one visit

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Send pictures for a quote

Before you send pictures, a few simple things make all the difference:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Your postcode, so we can check dates

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Do you need non-slip bath coating in Glenancross?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • How the colour is matched
  • How long the guarantee is and what it covers
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

Where we work around Glenancross

Glenancross is in Highland. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We cover 253 places in Highland, from the larger towns to small villages.

Postcode districts we cover here: PH40. With the B8008 close by, Glenancross is easy for our repair technicians to reach. Other places close to Glenancross include Morar (1 mile north-east), Arisaig (3 miles south), Mallaig (3 miles north), Ardvasar (7 miles north) and Armadale (8 miles north). Remote and island addresses take a little more planning, so call us to arrange it.

Around Glenancross

Glenancross’s nearest station is Morar station, roughly 1 mile north-east of the centre. Further afield, we also cover the area around Land (3.2 miles south). Open spaces near Glenancross include Lochan a' Chléirich.

Map of Glenancross © OpenStreetMap contributors

Repairing versus replacing in Glenancross

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

Why book with us

  • One visit for most repairs
  • Straight answers about what a repair can do
  • One price list for the entire UK
  • Rooms protected and left tidy

See our prices page.

Glenancross: your questions answered

Is there a guarantee?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

How much does non-slip bath coating cost in Glenancross?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

What happens next?

We review the pictures and send a fixed quote with dates.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.