Aberdeenshire · Scotland
Non-Slip Bath Coating for Glenbervie homes
Our technicians come to Glenbervie for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a few hours, including clearing up.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Related advice
How we handle non-slip bath coating in Glenbervie
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, on wet room floors (ask us), acrylic baths and resurfaced baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Glenbervie (AB39)
- Area hub
- Aberdeenshire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Glenbervie
What else we do in Glenbervie
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before booking.
Materials we work on in Glenbervie
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What non-slip bath coating costs
Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- The material and finish
- How hard the colour is to match
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A wider photo showing the whole bath or shower tray
- Any earlier repairs or coatings
Email us pictures of the damage and a wider shot of the whole item, with your AB39 postcode, and we will come back with a fixed quote.
Glenbervie questions
What does non-slip bath coating cost?
Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Common problems we fix in Glenbervie
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The things clients generally mention when they call are:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What your quote should include
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Who will actually do the work
- How long it needs to cure
Repair or replace in Glenbervie?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Our prices are the same across the UK, with no extra for Glenbervie. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Glenbervie
- Every repair guaranteed for a year
- No need to remove anything
- One visit for most repairs
- Straight answers about what a repair can do
Read our prices page.
Glenbervie and nearby
Glenbervie is about 14 miles north of Montrose, in Aberdeenshire. Clients in Glenbervie get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 161 towns and villages across Aberdeenshire. Our jobs stretch from Glenbervie to Edinburgh (74 miles away).
Here we cover the AB39 postcode area. We also travel to Drumlithie (1 mile east), Auchenblae (3 miles south-west), Fordoun (3 miles south), Arbuthnott (4 miles south-east) and Roadside of Kinneff (5 miles south-east). Larger places within reach include Montrose (14 miles south), Stonehaven (7 miles north-east), Banchory (10 miles north), Laurencekirk (7 miles south-west), Newtonhill (12 miles north-east) and Inverbervie (6 miles south-east).
Local landmarks in Glenbervie
Our customers here include homes close to West Church and War Memorial and the streets around them. Further afield, we also cover the area around Drumtochty Castle (4.1 miles west). Not far away are Herscha Hill.
Landlord and trade work in Glenbervie
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
If you manage property in Glenbervie, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
