Caerphilly · Wales
Non-slip bath & shower coating in Glenside, Caerphilly
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Glenside. Send pictures for a free, fixed quote.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Non-slip bath coating at your home in Glenside
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on enamelled baths, shower trays and wet room floors (ask us), and common reasons people contact us are worn-out textured areas and safety for older or less mobile people.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Glenside (NP11)
- County
- Caerphilly
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
Places near Glenside
Other services in Glenside
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Glenside. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Generally one visit, start to finish
- CHAS and Constructionline accredited
Read our full price list.
Prices and what affects them
Every quote is fixed and free. What we look at:
- How many areas need work
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlord and trade work in Glenside
Landlords, letting agents and housing providers in Glenside use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Our work in Glenside
Glenside is about 5 miles south-west of Cwmbrân, in Caerphilly. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Glenside is one of 94 places in Caerphilly where we work. Our nearest city page is Birmingham, about 79 miles away.
Jobs in NP11 are booked in the same way as anywhere else. Neighbouring places we cover include Newtown (1 mile north-west), Danygraig (1 mile south-east), Pontywaun (1 mile north), Wattsville (1 mile west) and Pontymister (1 mile south-east). Within a short drive, we also cover Caerphilly (5 miles south-west), Blackwood (5 miles north-west), Ystrad Mynach (5 miles north-west), Cefn Fforest (5 miles north-west), Pontllanfraith (4 miles north-west) and Trecceln (4 miles north).
Local landmarks in Glenside
Locally, our jobs take us to homes close to The Monkey pub, Church of St Mary Risca and Waunfawr Primary School and the streets around them. The nearest railway station is Crosskeys station, roughly 0.5 miles north of the centre. A little further out are Rhyd-y-gwern (2.3 miles south-west) and Risca Industrial History Museum (0.9 miles east). Green spaces nearby include Mynydd Machen.
FAQs for Glenside
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How do I get a price for non-slip bath coating in Glenside?
We give a fixed quote from your pictures. Send a close-up and a photo of the whole item with your NP11 postcode.
Are there extra charges for Glenside?
Travel is included in the price, with the same prices everywhere we work.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Let us know which floor the room is on
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Glenside, and we will come back with a fixed quote.
Advice
What we are called out for in Glenside
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
What to look for in a quote
- How your room will be protected
- If travel is included in the price
- How long it needs to cure
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
