East Riding of Yorkshire · England

Non-Slip Bath Coating for Goole homes

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Goole. Send pictures for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Goole?

What we can’t put right

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

Non-slip bath coating at your home in Goole

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include worn-out textured areas and safety for older or less mobile people, on wet room floors (ask us), enamelled baths and shower trays.

Big or small, it’s backed by a one-year guarantee in Goole and across East Riding of Yorkshire. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Goole (DN14)
Region
East Riding of Yorkshire
Guarantee
12 months on all our work
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Signs you need non-slip bath coating in Goole

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a picture if you notice any of these:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • What prep work is covered
  • Whether they match the colour on site
  • When it can be used again
  • Whether a trained technician does the job

Choosing a repair company

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

About Goole

Goole is about 13 miles north-west of Scunthorpe, in East Riding of Yorkshire. Jobs in Goole are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Goole is one of 299 towns and villages in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 29 miles away.

Postcode districts we cover here: DN14. From Westfield Square, Fifth Avenue and St Andrew's Terrace or anywhere nearby, we can come to you. Goole is on the A161 and A614, which makes it straightforward to reach. Other places close to Goole include Hook (1 mile north-east), Skelton (2 miles north-east), Booth (2 miles north), Howdendyke (2 miles north) and Kilpin Pike (2 miles north-east). We also work in nearby towns such as Market Weighton (14 miles north-east), Brough (13 miles east), Howden (3 miles north), South Cave (11 miles east), Elloughton (13 miles east) and Snaith (7 miles west). As one of the bigger places in East Riding of Yorkshire, Goole is somewhere we visit often.

Near you in Goole

Typical jobs here are in homes near Church of St John, The City and County pub and St Joseph's Catholic Primary School, among other places. Goole has its own railway station: Goole station. Well-known places in the area include Goole and District Hospital (0.7 miles north).

Map of Goole © OpenStreetMap contributors

What happens on the day

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes a few hours.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before
  • Let the surface dry out before the visit

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Send pictures for a quote

Advice

Common questions in Goole

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Do the materials smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Will I see the coating?

Very little: the treated area looks slightly matt.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Prices and what affects them

A fixed quote means you know the cost before booking. We look at:

  • The colour and finish to match
  • The material
  • Where the damage is and how we get to it
  • What kind of damage it is

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Natural light rather than flash
  • Your postcode, so we can check dates
  • Details of any past repairs
  • One picture of the whole bath or shower tray

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Repairing versus replacing in Goole

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why Goole customers choose us

  • We leave the room as we found it
  • Work done at your home or business
  • One-year guarantee on every repair
  • Nothing taken out or refitted

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.