Derbyshire · England

Non-Slip Bath Coating in Grassmoor

Non-slip bath coating for Grassmoor, without a refit. Get a fixed price from your pictures, then we come to you.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Grassmoor?

Non-slip bath coating in Grassmoor without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and safety for older or less mobile people, on shower trays, wet room floors (ask us) and enamelled baths.

We stand behind the work with a one-year guarantee, so you’re covered after the visit. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Grassmoor (S42)
Region
Derbyshire
Warranty
12 months on all our work
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

What affects the price in Grassmoor

We price every job individually, from your photos. The main factors are:

  • The material and finish
  • How easy the damage is to reach
  • What kind of damage it is
  • The size and number of damaged areas

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

Phone pictures are fine. Just make sure we can see:

  • A clear, close picture of the problem area
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.

Where we work around Grassmoor

Grassmoor is about 3 miles south-east of Chesterfield, in Derbyshire. We visit customers in Grassmoor and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover all 532 towns and villages across Derbyshire. You can also see our page for Manchester, about 39 miles away.

Our technicians cover all of the S42 postcode area. Whether you live on Cornwall Drive, Norfolk Avenue and Chapman Lane or anywhere nearby, a technician can come to you. Main roads around Grassmoor include the B6038, so getting to you is simple. Neighbouring places we cover include North Wingfield (1 mile south), Holmewood (1 mile south-east), Heath (2 miles east), Lower Pilsley (2 miles south) and Stainsby (3 miles east). Within a short drive, we also cover Chesterfield (3 miles north-west), Belper (12 miles south), Heanor (13 miles south), Dronfield (8 miles north-west), Ripley (10 miles south) and Bolsover (5 miles north-east).

Landmarks near Grassmoor

We visit homes around Tupton Hall School, Grassmoor Primary School and Tupton Hall School and the streets around them. Other local landmarks include The Parish Church of St James the Apostle (0.7 miles east) and The Miners Arms (within half a mile south-west). For rail, the closest station is Chesterfield station, roughly 2.9 miles north. Well-known places in the area include Stainsby Mill (3.2 miles east) and Bolsover Castle (4.6 miles north-east).

  • Other local spots include Municipal Borough of Chesterfield (2.6 miles north)
Map of Grassmoor © OpenStreetMap contributors

How the visit works

Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Let us know about parking or access

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • We will tell you if it’s not worth repairing
  • A fixed quote before you book
  • No extra charge for your area
  • Every repair guaranteed for a year

Take a look at our full price list.

Landlords, agents and businesses in Grassmoor

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.

For anyone letting property in or around Grassmoor, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Common questions in Grassmoor

Do you cover Grassmoor?

Yes. We work across the UK and come to Grassmoor and the rest of Derbyshire. Send pictures and we’ll quote, or call 0345 017 0787.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Will there be a smell?

Expect a mild smell while we are working, which fades afterwards.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths

Do you need non-slip bath coating in Grassmoor?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Signs it’s time to call us include:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • When it can be used again
  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included
  • Who will actually do the work

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.