Derbyshire · England
Non-Slip Bath Coating in Great Wilne
Non-slip bath coating in Great Wilne without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Great Wilne
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We are often asked to fix worn-out textured areas and bath mats that harbour mould or get forgotten, in enamelled baths, shower trays and resurfaced baths.
All our work is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Great Wilne (DE72)
- Region
- Derbyshire
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a morning or an afternoon. We leave the room clean and ready to use once it has cured.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Places near Great Wilne
What else we do in Great Wilne
Covering Great Wilne
Great Wilne is about 2 miles south-west of Long Eaton, in Derbyshire. Our technicians come to homes and businesses in Great Wilne and nearby villages, so there’s no workshop to go to. Great Wilne is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from Great Wilne to Birmingham (36 miles away).
Postcode districts we cover here: DE72. Other places close to Great Wilne include Shardlow (1 mile south-west), Cavendish Bridge (1 mile south), Church Wilne (1 mile north), Draycott (2 miles north) and Ambaston (2 miles north-west). Larger places within reach include Swadlincote (12 miles south-west), Ilkeston (7 miles north), Belper (12 miles north-west), Heanor (10 miles north), Ripley (12 miles north) and Langley Mill (10 miles north).
Landmarks near Great Wilne
Our customers here include homes close to New Inn, Church of St Chad and Shardlow Primary School, among other places. Other local landmarks include Castle Donington College (2.4 miles south) and Shardlow Hall (0.7 miles south-west). For rail, the closest station is Long Eaton station, roughly 2.1 miles east of the centre. Other landmarks nearby include Donington Castle (2.1 miles south) and Castle Donington Museum (2.3 miles south). The countryside around Great Wilne includes Attenborough Nature Reserve.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
Prices and what affects them
There’s no charge for travel to Great Wilne. The price depends on:
- What the surface is made of
- The type of damage
- Access to the area
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed price
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath or shower tray
- A close-up of the damage, in focus
- What it’s made of, if you know
- Natural light rather than flash
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Your questions about non-slip bath coating in Great Wilne
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. You are under no obligation.
How much does non-slip bath coating cost in Great Wilne?
The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Do you cover Great Wilne?
We do. Technicians travel to Great Wilne from across the region, and the price is the same as everywhere else.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Common problems we fix in Great Wilne
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Common reasons people in Great Wilne contact us are:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Before booking anyone
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- If travel is included in the price
Repairing versus replacing in Great Wilne
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- No need to remove anything
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- Every repair guaranteed for a year
Take a look at our full price list.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
