Lincolnshire · England
Non-Slip Bath Coating for Haconby homes
Non-slip bath coating for Haconby, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
Where we work around Haconby
Haconby is about 4 miles north of Bourne, in Lincolnshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 68 miles away.
Jobs in PE10 are booked in the same way as anywhere else. Jobs here include addresses on Main Street, Newlands Road and Church Street. If you’re just outside Haconby, we cover Morton (1 mile south-west), Dunsby (1 mile north), Hanthorpe (1 mile south-west), Rippingale (2 miles north) and Dowsby (3 miles north). Further out, we also cover Grantham (14 miles north-west), Spalding (9 miles east), Stamford (12 miles south-west), Sleaford (13 miles north), Bourne (4 miles south) and Austerby (4 miles south).
Near you in Haconby
In Haconby, that means homes near Church of St. Andrew, The Five Bells pub and The Morton Church of England (Controlled) Primary School and the streets around them. Well-known places in the area include Aslackby Castle (3.4 miles north).
About our non-slip bath coating in Haconby
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, in shower trays, resurfaced baths and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Haconby (PE10)
- County
- Lincolnshire
- Cover
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
FAQs for Haconby
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Do you come to Haconby?
Yes. We cover the entire UK and travel to Haconby and the rest of Lincolnshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
What affects the price in Haconby
There’s no charge for travel to Haconby. The price comes down to:
- The type of damage
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- The material, if you know it
- Natural light rather than flash
- Something in shot to show the size
- A wider photo showing the whole bath or shower tray
If you are in Haconby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
How it works
We work cleanly and quietly. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Open a window if you can
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Honest limits
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
What else we do in Haconby
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Common problems we fix in Haconby
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Comparing quotes
- Who will actually do the work
- Whether the colour is mixed to match
- Whether the price covers travel
- How changes to the job are handled
Repairing versus replacing in Haconby
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Haconby. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- No need to remove anything
- Dust sheets down, tidy finish
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
