Bradford · England

Non-Slip Bath Coating for Hainworth Shaw homes

Non-slip bath coating across Hainworth Shaw and nearby, generally in one visit and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Hainworth Shaw

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We carry out planned and one-off repairs for housing associations and facilities teams in Bradford and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Non-slip bath coating at your home in Hainworth Shaw

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can help, on resurfaced baths, acrylic baths and enamelled baths alike.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Hainworth Shaw (BD21)
Region
Bradford
Cover
12 months on all our work
Quotes
Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • No need to remove anything
  • A year’s guarantee on all work
  • No extra charge for your area
  • Repair technicians who travel to you, UK-wide

See our full price list.

How we price non-slip bath coating

We give every job a fixed price from pictures. This is what makes a difference:

  • Access to the area
  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • The material

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • What it’s made of, if you know

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before you book.

Materials we work on in Hainworth Shaw

  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

Hainworth Shaw and nearby

Hainworth Shaw is about 1 mile south-east of Keighley, in Bradford. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Hainworth Shaw is one of 140 towns and villages in Bradford we cover. Our jobs stretch from Hainworth Shaw to Leeds (about 15 miles away).

Every address in BD21 is within our area. Jobs here include addresses on Shaw Lane and Back Shaw Lane. We also cover the places around Hainworth Shaw: Ingrow (1 mile west), Hainworth (1 mile west), Damems (1 mile west), Bocking (1 mile south-west) and Exley Head (1 mile north-west). Within a short drive, we also cover Bradford (7 miles south-east), Bingley (3 miles east), Shipley (5 miles east), Baildon (5 miles east), Great Horton (7 miles south-east) and Upper Green (7 miles south-east).

Landmarks near Hainworth Shaw

We visit homes around Church of St John, The Guide Inn and Oakbank School and the streets around them. The nearest railway station is Keighley station, about 1.4 miles north. Further afield, we also cover the area around Haworth (2.1 miles south-west) and Airedale General Hospital (4.3 miles north-west). Green spaces nearby include Redcar Tarn.

Map of Hainworth Shaw © OpenStreetMap contributors

Common questions in Hainworth Shaw

What information do you need?

A close-up, a wider photo and your postcode. Then we will agree a date.

Do you come to Hainworth Shaw?

We do. We send a technician to Hainworth Shaw for every job, and the price is the same as everywhere else.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Do the materials smell?

There may be a mild smell during the work.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Do you need non-slip bath coating in Hainworth Shaw?

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The things customers normally mention when they call include:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

What your quote should include

  • Whether cleaning and preparation are in the price
  • A fixed quote, and whether VAT is included
  • Whether they match the colour on site
  • How changes to the job are handled

How to compare quotes

The process

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated
  • Let the surface dry out before the visit

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.