Kent · England

Non-slip bath & shower coating in Hale Street, Kent

Non-slip bath coating in Hale Street without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Hale Street?

Non-slip bath coating in Hale Street without replacing anything

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair acrylic baths, shower trays and resurfaced baths, and the jobs we see most are worn-out textured areas and safety for older or less mobile people.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Hale Street (TN12)
Region
Kent
Guarantee
A year, on every repair
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What a repair cannot fix

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

Landlords, agents and businesses in Hale Street

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

When to call us in Hale Street

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Most people get in touch after spotting one of these:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Questions to ask before booking

  • How the colour is matched
  • Who turns up on the day
  • How the room is protected while they work
  • Whether the price covers travel

How to compare quotes

About Hale Street

Hale Street is about 5 miles east of Tonbridge, in Kent. Wherever you are in the TN12 postcode area, we come to you. We work in 922 places across Kent, from the larger towns to small villages. We work right across the region, from Hale Street to London (29 miles away).

All of TN12 is covered. We regularly work on streets such as Hale Court, Hale Street and Pattenden Gardens. We also travel to Branbridges (1 mile south), East Peckham (1 mile south-west), Peckham Bush (1 mile north-west), Snoll Hatch (1 mile south-west) and Beltring (1 mile south). Within a short drive, we also cover Maidstone (7 miles north-east), Sevenoaks (10 miles north-west), Royal Tunbridge Wells (8 miles south-west), Gravesend (15 miles north), Tonbridge (5 miles west) and Northfleet (15 miles north).

Around Hale Street

We visit homes around The Harp pub, East Peckham Primary School and Church of the Holy Trinity and the streets around them. The closest station to Hale Street is Yalding station, roughly 0.9 miles north-east of the centre. Nearby you will also find Teapot Island (1 mile east) and Oakwood Hospital (5.2 miles north-east).

Map of Hale Street © OpenStreetMap contributors

Hale Street: your questions answered

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How much does non-slip bath coating cost in Hale Street?

Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Do you cover Hale Street?

Yes. We cover the whole UK and come to Hale Street and the rest of Kent. Send photos and we will quote, or call 0345 017 0787.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Can you repair something that is been repaired before?

Normally, yes. We remove the old repair before doing a new one.

What happens after I send photos?

We come back with a fixed price. You’re under no obligation.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Let us know which floor the room is on

Get a quote

For a price in Hale Street, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Advice

What affects the price in Hale Street

There are no hourly rates or hidden extras. The price is based on:

  • How much damage there is
  • The type of damage
  • Whether we combine several jobs
  • Where the damage is and how we get to it

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

Photographing the damage takes a minute. Try to send:

  • Details of any past repairs
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • Honest advice, even when it means no job
  • Fixed prices from your photos

Read our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.