Staffordshire · England

Non-Slip Bath Coating for Handsacre homes

Local non-slip bath coating for Handsacre: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Handsacre

About Handsacre

Handsacre is about 3 miles east of Rugeley, in Staffordshire. We visit homes and businesses in Handsacre and nearby villages, so nothing has to leave your home. Handsacre is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 19 miles away.

Our repair technicians cover all of the WS15 postcode area. Jobs here include addresses on Poplars Road, Tuppenhurst Lane and The Croft Leys. Other places close to Handsacre include Tuppenhurst (1 mile east), Armitage (1 mile west), Mavesyn Ridware (1 mile north-west), Longdon (1 mile south-west) and Pipe Ridware (1 mile north). Larger places within reach include Stafford (12 miles north-west), Burton upon Trent (10 miles north-east), Tamworth (11 miles south-east), Cannock (7 miles south-west), Lichfield (4 miles south) and Rugeley (3 miles west).

What’s near Handsacre

In Handsacre, that means homes near The Crown Inn, Church of St Nicholas and Hayes Meadow Primary School and the streets around them. The nearest railway station is Rugeley Town station, roughly 3.2 miles west. Well-known places in the area include Cannock Castle Ring (3.6 miles south-west) and St Matthew's Hospital (4.1 miles south). Not far away are George's Hayes and Stowe Pool.

Map of Handsacre © OpenStreetMap contributors

Non-slip bath coating at your home in Handsacre

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for a bath or tray that is slippery when wet and safety for older or less mobile people, across enamelled baths, acrylic baths and shower trays.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Handsacre (WS15)
Area hub
Staffordshire
Warranty
12 months on all our work
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Common problems we fix in Handsacre

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Signs it’s time to call us include:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Questions to ask before you book

  • How long it needs to cure
  • How to care for the finish
  • Whether a trained technician does the job
  • Whether the price covers travel

Our hiring checklist

Handsacre questions

Will I see the coating?

Very little: the treated area looks slightly matt.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

How do I get a price for non-slip bath coating in Handsacre?

The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon for most jobs. We leave the room clean.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job.

Get a fixed quote

Related advice

When we would advise against a repair

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

Materials we repair

  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Repairing versus replacing in Handsacre

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Handsacre. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Free fixed quotes from pictures
  • Most jobs done in one visit
  • Work done at your home or business

Take a look at our prices page.

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Prices and what affects them

You won’t pay by the hour. The price is based on:

  • The type of damage
  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it
  • What the surface is made of

Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your pictures

Two or three clear pictures are usually enough. It helps if you send:

  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • A wider photo showing the whole bath or shower tray

To get a price, send a couple of pictures using our quote form or call us. We will say straight away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.