Bracknell Forest · England
Non-slip bath & shower coating in Harmans Water, Bracknell Forest
Our repair technicians come to Harmans Water for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet

Questions from Harmans Water
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What do you need from me?
Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we will agree a date.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you come to Harmans Water?
We do. We send a technician to Harmans Water for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What happens next?
We come back with a fixed price. You’re under no obligation.
Non-slip bath coating in Harmans Water, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can normally put it right, whatever the material.
You get a one-year guarantee, the same in Harmans Water as everywhere else we work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Harmans Water (RG12)
- Region
- Bracknell Forest
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Towns and villages near Harmans Water
What else we do in Harmans Water
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
How we price non-slip bath coating
We do not charge extra for travel to Harmans Water. The price comes down to:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How easy the damage is to reach
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- One picture of the whole bath or shower tray
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Ensure the room can be ventilated
- Make sure the area is dry
- Point us to the nearest place to park
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Harmans Water and nearby
Harmans Water is about 1 mile south-east of Bracknell, in Bracknell Forest. From the centre of Harmans Water to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Harmans Water is one of 41 places in Bracknell Forest we cover. We work right across the region, from Harmans Water to London (29 miles away).
Jobs in RG12 work the same way as everywhere else we cover. Jobs here include addresses on The Square, Jaguar Lane and Mendip Road. You will find Harmans Water on the A322, so it’s easy for us to reach. We also travel to Jennett's Park (1 mile north-east), Forest Park (1 mile east), The Warren (1 mile east), Easthampstead (1 mile west) and Bracknell (1 mile north-west). We also work in nearby towns such as Sandhurst (4 miles south-west), Binfield (3 miles north-west), College Town (5 miles south), Little Sandhurst (5 miles south-west) and Owlsmoor (4 miles south-west).
Near you in Harmans Water
We visit homes around The Horse And Groom Public House, Harmans Water Primary School and St Paul and the streets around them. Other local landmarks include The Brakenhale School (0.6 miles north-west) and The Brakenhale School (0.6 miles north-west). Harmans Water’s nearest station is Martins Heron station, roughly 0.6 miles north-east of the centre. Other landmarks nearby include The Lexicon (1.1 miles north-west) and Heatherwood Hospital (2.3 miles east). Green spaces nearby include Wildmoor Heath and Heath Lake.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, so there’s no premium for Harmans Water. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- We will tell you if it’s not worth repairing
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
Read our full price list.
What we are called out for in Harmans Water
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people get in touch when they notice something like this:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Comparing quotes
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.

